DoubleEnder
Well-Known Member
My new (70 year old) boat will be launched soon. She is a 25’ daysailer/weekender
I’ll spend some time sorting things out and learning how everything works, but I’m thinking about electrics. The boat has limited dry space suitable for a battery/ batteries.
We have a Yanmar 1GM with an alternator whose size is unclear, but it isn’t going to be big. I’ll check.
My electrical requirements are small and will stay small:
LED nav lights. Unlikely to be doing overnights.
Sounder and log
Tiller pilot
2 LED cabin lights
USB charger for phone and tablet.
Auto bilge pump (wooden boat)
No fridge, heater, fixed VHF, plotter, stereo, TV, radar, AIS, jacuzzi or windlass.
The current set up is a bit of a mess, with a variety of switches and in line fuses. There are two 12v batteries: one dedicated to the bilge pump, sitting in a cockpit locker and charged by a small solar panel. The other is in a proper battery box, in the cabin, charged by the alternator. The batteries are not linked in any way.
The boat will be moored on a pontoon, but I don’t want the aggro of shore power, so I would keep a solar panel. We will be at the top of the river, & it’s a good 30 minutes of motoring both in and out.
I’m going to figure out where to put a proper small switch panel, and am wondering about having just one, decent size lead acid battery in the cabin to start the engine and run everything. I could fit a meter (what sort would be best?) to keep an eye on charge.
This would save space (which is at a premium) cost, and complexity. And then I could keep one of those engine emergency starter packs just in case I exhaust the battery.
I’d value your thoughts. And, is there any advantage in using a lithium battery rather than a good quality lead acid? As you can tell I prefer simplicity if possible
Thank you
I’ll spend some time sorting things out and learning how everything works, but I’m thinking about electrics. The boat has limited dry space suitable for a battery/ batteries.
We have a Yanmar 1GM with an alternator whose size is unclear, but it isn’t going to be big. I’ll check.
My electrical requirements are small and will stay small:
LED nav lights. Unlikely to be doing overnights.
Sounder and log
Tiller pilot
2 LED cabin lights
USB charger for phone and tablet.
Auto bilge pump (wooden boat)
No fridge, heater, fixed VHF, plotter, stereo, TV, radar, AIS, jacuzzi or windlass.
The current set up is a bit of a mess, with a variety of switches and in line fuses. There are two 12v batteries: one dedicated to the bilge pump, sitting in a cockpit locker and charged by a small solar panel. The other is in a proper battery box, in the cabin, charged by the alternator. The batteries are not linked in any way.
The boat will be moored on a pontoon, but I don’t want the aggro of shore power, so I would keep a solar panel. We will be at the top of the river, & it’s a good 30 minutes of motoring both in and out.
I’m going to figure out where to put a proper small switch panel, and am wondering about having just one, decent size lead acid battery in the cabin to start the engine and run everything. I could fit a meter (what sort would be best?) to keep an eye on charge.
This would save space (which is at a premium) cost, and complexity. And then I could keep one of those engine emergency starter packs just in case I exhaust the battery.
I’d value your thoughts. And, is there any advantage in using a lithium battery rather than a good quality lead acid? As you can tell I prefer simplicity if possible
Thank you