Recent content by ElJames

  1. E

    Guernsey's Marina - St Peter Port

    Piers 1. We moor in the river Medway we like going South the weather is normally better 2,We like the atmosphere and friendly people 3. They are both good and have sills 4. It has everything we need there perhaps electric on the outside moorings
  2. E

    Prop refurb

    Invicta Props Chatham Dockyard [Andy] 01634 830689
  3. E

    Electrical issues - looking for recommendations in the Gosport area

    Try Dave he is in the Gosport Area 07747687314
  4. E

    Another one for you electricians❓

    Brought batteries off an EBay shop with 4 yrs guarantee 3 1/2 years latter failed had a report from Halfords emailed to them along with invoice next day 2 replacements arrived no problem
  5. E

    Volvo Penta TAMD61A turbo charger reconditioning

    You all mention a turbo problem but not said what could have been the possible cause for the turbo to have the problem 1/ is the oil of good quality and clean 2/very important when was the aftercooler last removed and cleaned the air filter might have been changed but that will not mean the...
  6. E

    Rate my garage.

    Beautiful but at the moment the sunshine looks better very dull here
  7. E

    Patchy teak

    Try oxtalic acid much cheaper method if you read most cleaners contain this, add to warm water leave soaking over night gentle scrub across the grain then hose off.For those who are unaware oxtalic acid is from the rhubarb leaves ,Also keep it damp cover with towels rag etc, Stops working when...
  8. E

    Caulking melting

    I have just recalked mine same problem UV attacked or wrong type applied instead of using sikaflex I used stixal all from Tool station half the price and just as good only a better price took me 6 days on and off and to Finnish after sanding with 60 grit then 120 grit With SEMCO teak sealer I...
  9. E

    Temporary stainless steel ‘repair’

    I think some of you have lost the plot he said he wants recommendation to do a bush repair until the end of season J B Weld or Araldite or any good metal repair system I personally would go for Araldite but J B Weld is also good the trick is to make sure it clean free of oil and dry and keep a...
  10. E

    Windscreen rubber seals for a princess

    Try Ocean Chandlery .com `+44(0)1243 375774 .they are stockiest for Trend windows good luck Jim
  11. E

    Has derogation been reinstated?

    Hopefully
  12. E

    RPM loss on Volvo TAMD63L

    Go for the simple things first assume the the fuel injection is good it starts easy not much wrong with the engine it is revving not under load so the turbo will not be doing a lot you say it is not smoking a lot but exhaust outlet area is sooty when did you last clean (the most forgotten part...
  13. E

    Chartplotter and fishfonder

    Give Paul a call at PSI Marine from Maidstone he will be your local installation engineer very helpful and knowledgeable and competitive 08008047275
  14. E

    Princess 40

    Thanks but I need the actual size of a finished model please
  15. E

    Princess 40

    Has any P40 owners on this forum got there boat out on the land could possibly do me a big favour and measure its length from the bow roller to the end of the bathing platform I would to find out what is necessary to modify to reach a maximum of 40feet many thanks Jim P/S the 40 model with...
Top