Volvo TAMD 73/74 and 75 ECU - Cause for concern?

[Norsk]

Hello again.
Programming is not nessesary.
Why do you ask?
I can do that if necessary.
That is if flash memory is bad.
Most fault is ic components. I have all in stock.
Some edc have prosessor fault...it is very rare, but I also have those in stock.

 

[Norsk]

J.M
I do not care by David and Goliat.
I Just repair electronics and do not earn alot of money by repair those. But i like to fix units instead of buy new. Thats is what we all see now....Right to repair.
Regards Norsk

 

[DavidJ]

@Norsk is clearly doing a great job.
This may have been covered over the last 642 threads, but has anyone here had a unit fixed by @Norsk?

 

[Sunny265]

@Norsk is clearly doing a great job.
This may have been covered over the last 642 threads, but has anyone here had a unit fixed by @Norsk?

 

[Elysiumm]

J.M
I do not care by David and Goliat.
I Just repair electronics and do not earn alot of money by repair those. But i like to fix units instead of buy new. Thats is what we all see now....Right to repair.
Regards Norsk

Hi norsk how can you be contacted?

 

[TheWolfTC]

@Norsk is clearly doing a great job.
This may have been covered over the last 642 threads, but has anyone here had a unit fixed by @Norsk?

I have. He does a great job and glad I found him on this thread.

 

[Norsk]

Hi norsk how can you be contacted?

Send p.m

 

[Norsk]

Thanks to all.
In total i have now repaired about 20 edc1 units .
I must thank all in this forum, because you all here share info. So I say.
THANKS
I also repair other marine ecus.
D3 Volvo Penta EDC 15. D3 Volvo Penta EDC 17. Volvo Penta D 4 and D6 engines ecu.

 

[RAM427]

Norsk, how do

Jon and Michie.
Sorry for late answer.
Those edc1 units repaired get new components that will last +20 years.
They are same as originals. Some are from year 2000, and other from 2023.
Many components are very common todays electronic. What is old stuff is prosessor inside this edc1 unit. Its like a very old 486 computer from year 1998.
Anyway this prosessor do the Job easy to the very simple Job to belonging engines made by Volvo Penta . KAD engines. TAMD engines.

I pm you? I have a TAMD75p edc problem

 

[Norsk]

No pm in my inbox.

 

[volvopaul]

Norsk, how do

I pm you? I have a TAMD75p edc problem

Tell us the fault codes

 

[RAM427]

Tell us the fault codes

Codes are/have been 2.7 , 7.2. , 6.4. on my TAMD 75p. (2006).

 

[volvopaul]

Codes are/have been 2.7 , 7.2. , 6.4. on my TAMD 75p. (2006).

Check if you have an SPM fitted , if so check the plugs , if problem persists disconnect the SPM by placing the wiring loom back to standard , SPM will be at the lower helm.

 

[Brian VH]

No pm in my inbox.

Hello - I have an ECU that needs to be repaired, how much do you charge and how long does it take?

 

[Norsk]

You must contact me by mail.
"Google" repair volvo penta edc1
You find contact ifo on my web site.
Your p.m is not open.

 

[Kruss]

hi can i contact you Norks ?

 

[Kruss]

i have problem with mine ecu from vp74

 

[Harry25]

REPAIR REPARASJON VOLVO PENTA ECU TAMD 72-73 – Norsk Motorkompani

 

[oldgit]

Blimey if they repaired that PCB in that picture on their webpage ................respect.

 

[jon and michie]

Blimey if they repaired that PCB in that picture on their webpage ................respect.

Its Nice to see that someone has gone out of their way to to overcome a problem that the Manufacturer seemed to want to ignore the problem.