penberth3
Well-Known Member
So the alphabet soup tells us CT1 = OB1?
Screwfix OB1 sealant / adhesive
- Thread starter Malish
- Start date
So the alphabet soup tells us CT1 = OB1?
vyv_cox
Well-Known Member
Not exactly the same but certainly similar.
Bobc
Well-Known Member
It's the white CT1 that I've used. No idea about the clear one.
Mistroma
Well-Known Member
Yes, seems to agree with Samyl's #9 post where he said it was an improved version of the CT1 formulation. I suspect that the additional component enhances cross-linking to either speed up setting time or strength of the material, probably both. Not my area of expertise, that was mostly related to water soluble organic molecules but I'd guess it promotes formation of urethane links.
I'm considering OB1 as neither Screwfix nor Toolstation sell CT1 and both shops are conveniently located a short drive from my home. I can't see it being worse than CT1 and probably better for my purposes. Still odd that it is difficult to find details of the manufacturer online. I think that must be for some legal reason and won't affect my decision to buy it.
Poignard
Well-Known Member
I was told by someone in the technical advice department of CT1 that the clear version should not be used where it will be exposed to sunlight. I can't remember the reason for that.
Kelpie
Well-Known Member
Clear CT1 goes a horrible yellow colour after a while
V1701
Well-Known Member
I don't like the clear CT1 either, it's too thick and a bit lumpy, have used grey and white which have both been fine and do what they're supposed to well. I will try OB1 next time...
pandos
Well-Known Member
I was going to use some Tek Dek on fiberglass in my cockpit with Sika Sikaflex EBT+ All-Weather Sealant Black 300ml
would it be better or equally as good as this OB1 ?
would it be better or equally as good as this OB1 ?
sarabande
Well-Known Member
CTec have confirmed by email that CT1 is made in the UK, so it looks as if the OP is wrong about Latvia.
"
Our product is made in UK
From: Wendy Mackin - C-Tec HQ <Wendy@ct1.com>
Sent: 11 March 2020 16:52
To: Nicola Walsh - C-Tec HQ <nicolawalsh@ct1.com>
Subject: FW: New - EN - Technical Enquiry Form
"
| 10:40 (12 hours ago) | |||
|
From: Wendy Mackin - C-Tec HQ <Wendy@ct1.com>
Sent: 11 March 2020 16:52
To: Nicola Walsh - C-Tec HQ <nicolawalsh@ct1.com>
Subject: FW: New - EN - Technical Enquiry Form
Cantata
Well-Known Member
I've used Sika EBT (also from Screwfix, £6-something) recently, has the same appearance, consistency and smell as Sikaflex - any opinions on EBT? All the blurb on the container makes it sound good.
pandos
Well-Known Member
That's a strong statement , can the pleadings be posted here so we can keep abreast of the litigation?
Hacker
Well-Known Member
We use EBT as bedding compound for fitting hogs and garboards plus plank top stem/transforms. It’s good and much cheaper!
SAMYL
Well-Known Member
CTEC_NI_Limited said:
This statement that you have made publicly is malicious, slanderous, without foundation and completely untrue. Unless you retract this immediately, we will be taking legal action against you in the High Court Belfast, where you will be affixed with all costs. We advise to give you this your most urgent attention.
Before you waste all your money threatening and chasing after me perhaps you should check what your employees are telling your stockists of CT1 about the change to OB1.
Please also check through all my posts and check the dozens of times I have promoted the use of CT1 to the members here and the advice I have given about its applications in many many situations.
I don't recall you threatening me about all that promotion of your product - I will certainly not be doing that again.
This statement that you have made publicly is malicious, slanderous, without foundation and completely untrue. Unless you retract this immediately, we will be taking legal action against you in the High Court Belfast, where you will be affixed with all costs. We advise to give you this your most urgent attention.
Before you waste all your money threatening and chasing after me perhaps you should check what your employees are telling your stockists of CT1 about the change to OB1.
Please also check through all my posts and check the dozens of times I have promoted the use of CT1 to the members here and the advice I have given about its applications in many many situations.
I don't recall you threatening me about all that promotion of your product - I will certainly not be doing that again.
Biggles Wader
Well-Known Member
Troll alert!
viago
Well-Known Member
welcome to the forum.
an interesting way to ingratiate yourself into this little community.
i was wondering if you feel this somewhat confrontational attitude does anything to promote either yourself or your products?
might i suggest you start again and should you feel any mutterings here are inaccurate or misleading that you take the time to explain the situation as you see it without resorting to threat.
fyi i have been using ct1 for many years and find it a first rate product.
based entirely on your approach my instinct is to give mr kinobi a spin around the block.
Last edited:
Fiddlesticks
Well-Known Member
Probably a wind-up.
viago
Well-Known Member
now, that would be a silly thing to do and could get you into trouble. it's damaging to the company.
Aquaboy
Well-Known Member
Errrr........ I always get confused by this. Silicone is a lubricant yet people wonder why I doesn't stick
Tomahawk
Well-Known Member
Wow...
When I read the "statement". I thought good on you lot to have a go and try to keep your jobs.
But yur reaction persuades me to avoid your product and your company.
SAMYL
Well-Known Member
I was only repeating what my local builders supplier, where I bought my CT1, told me what the reps from the CT1 company had been telling him.
Don't shoot the messenger
