penberth3

That destroys it as a "boat" but doesn't solve the GRP problem, I wouldn't call landfill a solution. The crushing process would also...

I never doubted you Jonathan! You'll notice discs now have a "use by" date on the metal centre. Any disc without a date is so old it...

That's because bolt cutters are for cutting bolts and solid bar, not wire rope! The wrong tool for the job. Hammer and chisel is OK...

Result! All 8 machine screws removed unbroken and track removed. Irony is that unsuccessful tour of Screwfix, Toolstation etc for a 10mm...

But the other side of the MOT is that it has encouraged manufacturers to build cars that (for example) don't rust. In the last century...

The Cutty Sark is opposite the NMMC, you can do both 🍺 ;) .

Patience! Don't rush, you'll get there.

Haven’t been able to get to the boat much but this afternoon after spraying with cold shock fluid the impact driver (manual £17 from...

Same issue as the boiling water, not enough heat to have any useful effect.

Fortunately, the boat in the OP is still attached to its trailer.

The worse case is you're in court with a choice of saying "we deliberately didn't bother to check" or "we checked but missed a...

Not clear at all. Nothing there says the £20 is anything to do with the safety certificate. It could be for accommodating an outside...

Yes, I read it. That doesn't say the fee was re: the certificate.

Having been on the edge of a incident that arose because of someone claiming to be both insured and safe/healthy to do something, then...

The original post didn't say what the fee was for. The issue about BSS certificates came up in the replies.