pandos

There you go...I only had a quick look last night, see here. General rules for duty relief on returned goods No explicit mention of it...

I haven't looked this up properly but when I encountered this situation in 2004 I was advised that the rule was 3 years for any person...

Success 😁👍, Christmas has come early! A virtual pint is awarded to AntarcticPilot for the suggestion at #45 - thank you sir! If...

I'd cut the heads off the bolts, take off the plate and likely you will find that with no pressure on the bolts they thread out easily...

Just to be clear about terminology, the key sits in the keyway. It'll be the key that may need to be filed down a bit. First, make...

It certainly was a difficult situation, i think the real heroes were the lads that went into the water and kept the casualty from...

IRWIN 1602L3 Visegrip Long Nose Plier 4in, Silver https://amzn.eu/d/hhUSVon I have a pair of small molegrips like these. They would...

Can you put the removed ones back in and tighten them up tight to take the pressure off the stuck screws? Worth a try. I have removed...

Absolutely correct... Just look at the first post in this forum for a description of how good things were prior to the, rumoured...

Maybe you would read that post again.

The idea of becoming so dogmatic about the size of the boat is to follow the mindset of the Ostar people who had established something...

Hot air gun and a Bahco scraper...

I swapped my (endless) furling line and my outhaul to thinner ropes. It made a big difference. My biggest issue is friction because of...

I have similar difficulties with my relatively new to me boat. My main is new. The previous two owners also had the same issue. No...