Recent content by Hoolie

I`ve had a PSS seal for several years now without problems. It does have a feed form the raw water pump and does`t need squeezing. But I always break the seal between the stainless face and the carbon disk as it tends to get stuck after a period of not being used. This not only prevents the...

You have to have posted 5 or 6 times. Post a few spurious replies on one or more of the forums then you'll be OK!

OK with Chrome on my Android phone ...

The higher grade lasure (10-12 year life) from your local bricolage will be pretty uv resistant and doesn't flake off. I think I have redone our garden furniture twice (two coats max each time) since the original application about 25 years ago. IMO the spirit based products are more satisfactory...

Exactly so. I think what Boater Sam is saying is your accumulator does not have any air in it at all so it's not working and needs to be drained.

Good for you! But why are you telling us on here?

I had one of those without a diaphragm and it was bleeding useless! It was a real pain as it needed draining every few weeks. I replaced the old pump which had a fractured casing for one that has a proportional speed motor and no need for an accumulator. Huge improvement and the pump is much...

Buy your 4mm clear and apply a tinted film. Lots of offers on eBay as long as you search for '-black' to cut out spurious car products. I have the same problem with my new acrylic washboards.

Just as easy to fit a second thermostat, set at a lower temperature, to switch the 230v supply.

Chicken!

Up to Marseille and Hyeres then Porquerolles if we can find a berth/anchorage

Toothpaste is quite abrasive, even in small quantities, and I would think it's not suitable for bearings ...

Those of us that don't do Facebook can't see your ad. Why not post it here?

You do realise the dimensions are given in the product description link provided by the OP in the "specifications" tab?

Maybe the engine blew up an hour and 10 minutes after they were fitted?