Perkins perama, again.

Joined
7 Jan 2007
Messages
5,025
Visit site
Thanks for all advice I received awhile back concerning this engine, one more thing for now, the air intake should have a paper element inside mine is missing...what can I use in it place? Or where can I get a new element.
Thanks as ever .
 

rjp

Member
Joined
29 Apr 2004
Messages
462
Location
North Wales
Visit site
Mine doesn't have one either, and as far as I know it never has. The manual I have has no mention of one, where did you see that one should be present?
 

macnorton

Active member
Joined
11 Dec 2006
Messages
1,689
Location
Midlands
Visit site
Mmmmm.. Says M30, so presume the M means marine.

The book at the link below covers the marine version of this engine, it also shows the cooling fan that is not fitted to marine, I think its fair to assume that it's a one book covers all situation.

http://macnorton.weebly.com/uploads/4/9/1/5/4915906/perkins_perama_manual_english.pdf

Also the UK built engine has a tubular inlet where the one built in Japan has a rectangular mesh, neither have a paper element.
 

Allergy

Well-known member
Joined
2 Jul 2010
Messages
1,220
Location
Live in East London, UK. Boat in Portsmouth Harbou
Visit site
Thanks for all advice I received awhile back concerning this engine, one more thing for now, the air intake should have a paper element inside mine is missing...what can I use in it place? Or where can I get a new element.
Thanks as ever .
On my Volvo mb2020b (a Perkins by any other name) it only had a drum shaped sponge foam air filter.
This finally started to crumble several years ago so I got one(metal frame/paper element) from a car accessory shop that specialises in sports car air filters.
Look on ebay or google for a Performance air induction filters(automotive). Then find one which has the right size bore for your Perkins.
K&N air filters are expensive but very effective so look around.
Hope this helps
 

westhinder

Well-known member
Joined
15 Feb 2003
Messages
2,531
Location
Belgium
Visit site
Mine doesn't have one either, and as far as I know it never has. The manual I have has no mention of one, where did you see that one should be present?

Mine didn't have one either, just a metal mesh. Not a lot of dust or sand or whatever flying round in the engine compartment, I would have thought.
 
Top