pioneer

If you are going to fit the standard gimbal/rail assembly this increases the width and height. I made my own rails and re-used part of...

The topic of oyster layings in the Backwaters comes up from time to time, particularly around Kirby Creek. As promised a few weeks ago...

From the PLA General Directions for Navigating in the Port of London 2024:- (17.5) Vessels with an Operating Draught of less than 6.0...

I think that is the sort of thing the RYA has a lot of information on.

Cutler Marine are local stockists. When I used them 20+ years ago they installed my 1GM10 and later visits to their shop meant they knew...

I used a local (to me) motor repairer who dismantled the motor and repaired the damage caused through water ingress. Why the motor was...

My gas locker gets water into it via the drain hose if i forget to fit the bung into the drain pipe when I'm motoring. Might be worth a...

Reading some of the drafts and RYA response (there's a lot to plough through) has what appears to be several responsibilities for the...

WORX also make a battery jet washer. IIRC it's about 20psi with the long wand and 6psi with the short one. Some models can be fitted...