flaming
Well-Known Member
Sounds like there's going to be some demand for her then!
Surely being a CI boat they have no VAT/TVA encumbrance, best of all n worlds. Should make the ssle v quick and easy.In demand design, nearly new, no (I’m guessing, but have asked) post B-word double VAT/TVA encumbrance…..
Only if the price reflects this. A UK buyer wanting to sail the boat in the UK would in that situation be immediately hit with a bill of 20% on bringing here?Surely being a CI boat they have no VAT/TVA encumbrance, best of all n worlds. Should make the ssle v quick and easy.
That applies to all boats. Obviously it will be priced net of VAT/TVA and the buyer will pay, or not, in whatever country he wishes.Only if the price reflects this. A UK buyer wanting to sail the boat in the UK would in that situation be immediately hit with a bill of 20% on bringing here?
Surely being a CI boat they have no VAT/TVA encumbrance, best of all n worlds. Should make the sale v quick and easy.In demand design, nearly new, no (I’m guessing, but have asked) post B-word double VAT/TVA encumbrance…..
Surely being a CI boat they have no VAT/TVA encumbrance, best of all worlds. Should make the sale v quick and easy.In demand design, nearly new, no (I’m guessing, but have asked) post B-word double VAT/TVA encumbrance…..
Yes, that was my line of thought.....Surely being a CI boat they have no VAT/TVA encumbrance, best of all worlds. Should make the sale v quick and easy.
The original Triangle was cat 2. Now, rather more sensibly, it is cat 3 with life raft, plus a serious safety check list.I was surprised to see a Mustang in the results but then I read the NoR and discovered it's only a cat 3 event. Interesting...
The thruster problem was a production glitch by the thruster folks. The bearing was not sealing properly. So they gave me a new unit in the off season. No stress for me. It was a trickle leak. I did realize how thrusters are safer than sail drives for water ingress. Besides catastrophic scenarios they tend to fail with slow leaks.Any further issues with the bow thruster installation @CyclopsJason? Seem to recall, in one of your early YouTubes () that you had some water ingress. Was that just a one off commissioning glitch?
Anything you’d do differently / are very pleased that you did do, with the benefit of sea miles, spec wise?
Keep the vids coming!
I quite agree that take offs can be trickier than landings.The thruster problem was a production glitch by the thruster folks. The bearing was not sealing properly. So they gave me a new unit in the off season. No stress for me. It was a trickle leak. I did realize how thrusters are safer than sail drives for water ingress. Besides catastrophic scenarios they tend to fail with slow leaks.
I really enjoy the thruster because I am solo, new to mono hulls, twin rudder, in currents and any other excuse you can think of. I like any edge in docking but the thruster can sometimes ruin a great approach by over rotating the boat. Leaving a tight fairway is where the thruster shines.
Hello all,
What a great chain on the JPK39 FC. I just discovered it by accident. I own Cyclops, the 7th JPK.
The Antal halyard tensioner is only for my staysail. It is easy to add or subtract a couple of clicks of tension but does require a trip to the mast. I prefer a jib Cunningham for really easy quick jib adjustments but this is a cruising boat. I actually think it is important to practice leaving the cockpit so it does become foreign when bad luck forces you out of the bubble.
I will post some home generated polars at the end of the season. To that end I wish predict wind’s polar were more sail specific.
Jason
How sure are you of this opinion please?Yes, that was my line of thought.....
How sure are you of this opinion please?
I shied off several French and Dutch boats post Brxit when threatened with VAT on import. Re-import of a UK built, VAT paid before export (old days) boat, in one case...
Surely you pay VAT on import to UK (CIs being some sort of "tax haven"/tax avoidance scheme - my old employers allegedly "had a base office" there)...
but I'm just a humble Engineer and don't understand such schemes ?