Cantata
Well-Known Member
New chartlets for the Deben and Ore entrances have been added to our website today, following recent Trinity House surveys.
See East Coast Pilot - Downloads page | ECP
See East Coast Pilot - Downloads page | ECP
Deben and Ore entrances
- Thread starter Cantata
- Start date
Malish
Well-Known Member
It may be my printer, but when I try to print either chartlet the printer view is presented in A4 landscape format and only part of the page is used for the chartlet (they open on the PC as normal in full size portrait mode)
PaulRainbow
Well-Known Member
Work OK here.
DanTribe
Well-Known Member
Well done everybody involved in producing these charts, I will appreciate them when I visit later.
I'm a bit concerned with the squirly bit marked "the knolls".
I'm a bit concerned with the squirly bit marked "the knolls".
pioneer
Well-Known Member
Cantata
Well-Known Member
Sorry that was a typo on my part, now corrected.
Malish
Well-Known Member
resolved.. printed via Acrobat
Johnah
Well-Known Member
Hi All,
A small video of the Ore entrance now that the buoys are in position. It was just after dawn, so rather dull.
ORE ENTRANCE VIDEO April 1st 2026
Plus some photos.
John
A small video of the Ore entrance now that the buoys are in position. It was just after dawn, so rather dull.
ORE ENTRANCE VIDEO April 1st 2026
Plus some photos.
John
Last edited:
Cantata
Well-Known Member
The downloads each now include a new aerial photo, thank you Johnah.
PeterBoater
Well-Known Member
The Deben photograph is wrong: Knoll Spit is labelled as an SHB whereas in fact it's a PHB.
fredrussell
Well-Known Member
Posted in error, apols.
Last edited:
Cantata
Well-Known Member
Now corrected. Think I need a holiday. Perhaps I could go sailing......
Johnah
Well-Known Member
Hi All,
Below is the video of the Deben entrance on April 1st at LW in the evening. The tide was not that low at 0.8m above the CD, but it was too windy for photography during the next two lower tides.
DEBEN ENTRANCE video April 1st 2026
Also two photos:-
John
Below is the video of the Deben entrance on April 1st at LW in the evening. The tide was not that low at 0.8m above the CD, but it was too windy for photography during the next two lower tides.
DEBEN ENTRANCE video April 1st 2026
Also two photos:-
John
LittleSister
Well-Known Member
The Deben entrance looks all pretty straightforward in the aerial photo, but somewhat scarier on the chart - especially the mushroom cloud over The Knolls! 
Last edited:
Plum
Well-Known Member
John, thank you so much for your videos and photos. They are outstanding and provide such an important extra level of safety.
petemorley
New Member
I came up to Woodbridge today. No issues but keep in line with SWM and channel marks to avoid the Knolls "cloud"... very straightforward keeping close as usual to port as you enter channel over 10m depth in places....Thanks All
kev99
New Member
Trying to print the latest Deben and Ore chartlets today and had an issue..... ...BTW huge thanks to all involved in producing these, they are such an incredibly valuable aid........ the issue is that the pages display correctly in my pdf application but print on paper with double text. i.e as in this screenshot of the print preview
I can't find any obvious way to get around this in my settings, so has anyone else encountered this and what's the cure please? Or is it an artifact built into the pdf file itself?
thanks
I can't find any obvious way to get around this in my settings, so has anyone else encountered this and what's the cure please? Or is it an artifact built into the pdf file itself?
thanks
MikeBz
Well-Known Member
It printed fine for me.
kev99
New Member
The harbour office at SYH also had the same issue with the printouts they'd made for visitors. What are some of us doing wrong, or is it something in the original pdf or the font used that's more compatible with some apps than others? I haven't had this issue in previous years.
Malish
Well-Known Member
If you have the software then save the chartlets, open in Adobe Acrobat, then print from Actrobat... it worked for me
