Plum

No. The requirements are shown in post #4 and, as in post #15, plastic is OK if the whole filter complies with ISO10088, as does the...

I would suggest sourcing and fitting a brass drain plug. Then everyone will be happy. Mike

I suppose that would rule out plastic..

I have found this for a different model of Cobra vhf, does it work on yours? "MRF77B fixed vhf MMSI Reset: press the 4 buttons on the...

Just found this on an older post: 'Seems Marathon Leisure are the UK distributors for Cobra Marine, they may have some info or able to...

What make and model is the VHF? Maybe the editing software is available online somewhere. I have the software to edit a few of the ICOM...

Suggest you talk to Mantsbrite in Maldon Mantsbrite UK distibutors of navigation equipment

Well 2 years on and the Polymarine PVC lettering paint has been brilliant. Covered all the stickiness on the logo and stayed on fine...

Certainly looks to be the same base engine as the OP's one

Top marks for clean engine ! The valves in question are no longer available from VP and they now show the use of inline ball valves...

The water and hydrocarbons burned and unburned are coming from the combustion of the engine fuel whatever it is usually diesel, none of...

I would not do that. IC engine exhaust contains water vapour. How would you get the water out?

As Bowler says. I have the same ones. Normally left open and only needed to isolate the calorifier in case of a problem or maintenance

I struggled with the VP strainer (see post #4) for a year trying to maintain the airtight seal of the lid before finally replacing it...

Took about 4 3/4ltrs to fill the engine to the full mark on the dip stick.