Charging battery powered tools

ducked · 2026-01-25T18:30:10+0000

Chiara’s slave said:
I’d recommend not using an SDS on a boat. Not for anything. And even if you switch off the hammer action, the rotary speed is too low to be useful with a wire brush.

One of these?

https://www.amazon.co.uk/Electric-1...8893370200-B0FLPTRKG8-&hvexpln=0&gad_source=1

Chiara’s slave · 2026-01-25T18:56:11+0000

ducked said:
One of these?

https://www.amazon.co.uk/Electric-1...8893370200-B0FLPTRKG8-&hvexpln=0&gad_source=1

Yep, that is rubbish for wire brushing a keel. Great for drilling holes in concrete.

ducked · 2026-01-25T20:57:31+0000

Chiara’s slave said:
Yep, that is rubbish for wire brushing a keel. Great for drilling holes in concrete.

Think I've only used an air-powered one once, when I had a temporary labouring job in a shipyard. No concrete was harmed in the stretching of that ship.

IIRC the gizmo seemed to work ok, though the ship wasnt as rusty as my keels

Charging battery powered tools

ducked

Well-Known Member

Chiara’s slave

Well-Known Member

ducked

Well-Known Member

Share this page