Victron Centaur as power supply

Sea Change

Well-Known Member
Joined
13 Feb 2014
Messages
2,143
Visit site
Centaur connected to shore power, charging a bank of batteries whilst some small lights etc were running.
Due to some suspected problems with the batteries, I disconnected them and found that the lights stayed on. But after about 20 minutes, the power cut out.

Is this what you'd expect if you used a Centaur without a battery connected? I hope I haven't damaged anything...
 
I don't think the Centaur has a power supply mode, so if the batteries are disconnected it will still be using its charging logic, which would likely be the reason it cut out. I doubt anything will have been damaged.
 
I don't think the Centaur has a power supply mode, so if the batteries are disconnected it will still be using its charging logic, which would likely be the reason it cut out. I doubt anything will have been damaged.
Certainly no mention of a power supply mode in the literature.

.
 
Top