Scratch on hull

[Miker]

Went to the boat this morning which is on chocks in the club pound, and noticed a scratch along the side on the boat which was not there last week. I can't really blame any other nearby boat owner as there is a right of way through the pound.
The scratch is the sort that one can get on a car if driving down country lanes. It is too deep to polish out with 3M gelcoat restorer but not deep enough to warrant filling. Can anyone recommend any "Tcut" type stuff that would do the trick. I popped into my local chandlery but saw nothing suitable and was wondering whether a car accessory shop would be better.

 

[Ceirwan]

Try and find a G3 cutting compound, or alternatively 1200 grade wet and dry followed by polish.

 

[Miker]

Thanks. I will give it a go.

 

[alexrunic]

i would reccomend G3 too should do the trick just be carefull not to rub through the gel goat.