michael_99
Well-Known Member
follow up on a earlyer tread about benging ss pipe. This one will do it.
pipe bender
- Thread starter michael_99
- Start date
follow up on a earlyer tread about benging ss pipe. This one will do it.
oldsaltoz
Well-Known Member
Provided you cover the steel sections to prevent your stainless steel getting contaminated, or is this one that has synthetic anvil and socket of they are coated.
Avagoodweekend.
Avagoodweekend.
EUXINE_Rival
Well-Known Member
Don't believe it these are pretty useless except for bending gas pipe! The pipe needs to be thick walled and soft. Also the dies are designed for standard gas and waterpipe sizes not the same as stainless. If you want one though there are generally plenty available on ebay, maybe this shows how useless they are.
Strathglass
Well-Known Member
I don't know how good they are for bending SS pipe but the ones available in the UK certainly are compatable with normal marine tubing sizes as they have imperial sized dies.
They cost a bit over £100 from various suppliers.
15mm and 22mm stainless tubing is certainly available in the UK and that will bend ok with a standard heavy duty plumbing bender.
Iain
They cost a bit over £100 from various suppliers.
15mm and 22mm stainless tubing is certainly available in the UK and that will bend ok with a standard heavy duty plumbing bender.
Iain
michael_99
Well-Known Member
Did this
33mm o/d 2.5mm wall.
33mm o/d 2.5mm wall.
Other threads that may be of interest
