LittleShip
Well-Known Member
but the biggest job i have is painting the deck
Do Ya think! ?? with all that wiring and pipework to sort.......come on!
Tom
Do Ya think! ?? with all that wiring and pipework to sort.......come on!
Tom
mooring
- Thread starter garstang
- Start date
garstang
Member
cant see the wiring being to complicated as most of it is home made and runs down the left hand side of the cabin...pipe work might just leave that for now as it dont leak/move or make a noise so that can be sorted a little later as it might make some sense when the lectrics work fully and if all comes to all the marina berth is only 3/4 food deep so if anything does go wrong and she sinks then its not to far to the bottom..
deborahann
Well-Known Member
noticed while we were trapped inside the gate, that your boat seems to be somewhat toiletry challenged from below. Are they yours ???
deborahann
Well-Known Member
http://s70.photobucket.com/albums/i81/haydn_2006/?action=view¤t=Bodrum002.jpg
maybe hlb can help you out with some of them !
maybe hlb can help you out with some of them !
garstang
Member
not mine..lol but would swop one for my plastic one
Cliveshep
Well-Known Member
hlb - no, I didn't mean deck- washing with slurry, but you'll see in the picture that the feed to the possible "macerator" is on a "Y" branch on a sea-cock, it's the other one that could be a deckwash feed.
Wot you loike boy?
Wot you loike boy?
hlb
RIP
...................................................................................................
I see, so. So there will only be the occasional buck shot, limited in size by the restricted neck, sort of elongating it into more of a harpoon shape. Maybe a blast off for stubborn bits. Well it's a brown boat, so could be usefull for remedial work on the odd scar.
garstang
Member
Well it's a brown boat, so could be usefull for remedial work on the odd scar.
looks like i'll need a bigger pipe then couse i am sure there'l be more than the odd scar when i start to take her out...
