How Much!

[oldgit]

Need water pump cover for 2hp evinrude.This is alloy casting approx size of 50p piece with hole in middle. 45.00 + VAT.Gulp.

<hr width=100% size=1>Two boats please one here n one in the Med

 

[mtb]

Your kidding right !!! I need an impeller for my 15hp eninrude where dont I go to buy it then. The inner casing on mine has stainless cant you make something up ?

Cheers
Mick

<hr width=100% size=1>Danbrit is for sale I'm spending all my time working on her with no play best offer's please !!

 

[gonfishing]

new thermostat for volvo 130 £24.50 +vat !!!and it's not even gold plated!!!

julian


<hr width=100% size=1>man made it ,man can repair it, i think??

 

[studgies]

new oil pressure sensor for AQD31 £75 plus VAT!!!!!!

2 bearings for 290 outdrive £50 and £75 plus VAT, went to local bearing manufacturer with the number and got both for £17 inc VAT!!!!

<hr width=100% size=1>

 

[lanason]

New fuel pipe from fuel pump to Carbs on AQ 170 c - £180-00 !!!!!!! from VP

£3.50 from specialist hose supplier !!!! and damn good they were to - marine grade hoses. Very helpful - excellent - Hyphose (Nuffield Industrial Estate Poole BH17 0GH Tel: 01202 673333)



<hr width=100% size=1>Adrian
<A target="_blank" HREF=http://www.arweb.co.uk/argallery/kelisha>More Pics of Kelisha</A> /forums/images/icons/smile.gif

 

[mtb]

Isn't it crazy surely Volvo cant be that daft, British industry got daft like this and look what happened.

Cheers
Mick

<hr width=100% size=1>Danbrit is for sale I'm spending all my time working on her with no play best offer's please !!

 

[Chris_d]

Its mindblowing when you realise that it probably only cost 1p to make it, I have a
very good contact at BMW Germany who told me that a current M3 Coupe cost just £6300 to manufacture, the retail is £40K, now thats what I call a profit?

<hr width=100% size=1>

 

[Alistairr]

Get away!!

I find that very hard to believe............



<hr width=100% size=1><A target="_blank" HREF=http://www.hamptonandmcmurray.co.uk>Hampton and McMurray</A>

Petrol Rules..

 

[Chris_d]

Well he helped design the ECU, so I guess he has fair idea, you don't think they spend 500million developing a new 3 series to then only make a couple of K on each one.

<hr width=100% size=1>

 

[byron]

Eileen paid 7/6p (37.5p) for our marriage licence and it has cost me millions ever since.

<hr width=100% size=1>http://www.alexander-advertising.co.uk

 

[jhr]

...but at least you got her to pay for the license. I had to pay for ours, which imho is heaping insult on indignity ;o)



<hr width=100% size=1>

 

[oldgit]

The problem is the drive shaft has worn the hole in the water pump casting a bit oval.
The water is exiting via shaft and is not being forced round water jacket cooling circuit.think I may sleeve with bronze tube and bodge it in with instant metal or summat.

<hr width=100% size=1>Two boats please one here n one in the Med

 

[mtb]

Yes good idea thats all it needs maybe an o ring or small seal , mmm no why not machine it out to take a small seal or even a tufnle top hat bush.

Where did you try for the part, since they went bust I'm having trouble locating the w/ pump impeller for my 15

Cheers
Mick

<hr width=100% size=1>Danbrit is for sale I'm spending all my time working on her with no play best offer's please !!

 

[oldgit]

highway marine at Sandwich.01304 614814.

<hr width=100% size=1>Two boats please one here n one in the Med

 

[mtb]

Re: ta very much . nm

,,,

<hr width=100% size=1>Danbrit is for sale I'm spending all my time working on her with no play best offer's please !!

 

[dave36]

look at US sites, for sure part will be much cheaper and if you insist on normal US postal service you will have the part in 4 days, postal charge $7.55

<hr width=100% size=1>

 

[oldgit]

All sorted by bodge for now.Thanks for input.

<hr width=100% size=1>Two boats please one here n one in the Med