adelaidem
New member
just ordered one anyone know if i can interphase it with my st4000 navman auto pilot so i can see the road map in the cockpit or do i have to get some sort of repeater???
Furuno gp32
- Thread starter adelaidem
- Start date
aluijten
New member
Did somebody say please help me here?
DJE
Well-known member
I've got one and it sends out standard NMEA data. It talks to my Silva DSC radio and Raymarine ST60 instruments with no problems. Also got it talking to a laptop recently and backed up all my waypoints and routes.
Safran
New member
I have a GP32 interfaced to a Nasa repeater and other instruments. Should work with a 4000.
Yellow wire is NMEA out, blue is signal ground. Will need the GP32 set to NMEA v2 and Data2 to type REM (not AP as the 4000 should work out the course for itself from the position and next waypoint data). GP32 will not transmit any COG/SOG or waypoint informtaion unless a route has been entered and it is following it.
Yellow wire is NMEA out, blue is signal ground. Will need the GP32 set to NMEA v2 and Data2 to type REM (not AP as the 4000 should work out the course for itself from the position and next waypoint data). GP32 will not transmit any COG/SOG or waypoint informtaion unless a route has been entered and it is following it.
adelaidem
New member
opps! its a st4000 raymarine st4000 auto helm not the navman!
