Alicatt

Fit a remote USB reader, beats having to pull the plotter out. You obviously have to pull it out once to fit the reader.

Leaving Herentals this morning

Our marina for the night, Herentals on the Bocholt - Herentals canal.

Thanks for the kind words Simon and hope all is well. Not as fast as your machinery but doing a different job. Drop by next time...

I have different engines and thought the turbo gauges were disconnected as is done on a number of Ocean 37s however when I finally got...

If you're only running at idle speed the turbo won't be doing anything and nothing will show on the boost gauge.

There was an article about it in one of the Hardy Owners magazines, I can have a look for it when we get back home, we are on the canals...

Med sailing: either too much wind or not enough wind. Luckily there are also perfect days.

Our club mascot the Blauwe Reiger or the Grey Heron

Brother was a Radio Officer/FISO/Network tech on a few rigs and yes they had radar on the rigs he was on.

Following on from yesterdays excitement the glue had dried: Not sure where I’d be without 3D printing Had to pocket out behind the...

In today’s episode of not finishing your boat project… Started poking around with the engine control panel to transplant it into a new...

With the elbow coming from the oil cooler to the bronze pipe going to the raw water pump collapsing from the suck from the raw water...

Today's images.... Back flushing the turbo intercooler and the gearbox oil cooler, had some success, the hoses are not collapsing...