Miker
New member
I bought some 1 1/2 inch hose and vented loops for a Jabasco toilet and started to fit them. Sods Law struck again and I find that the seacock is 1 1/4 inches in diameter. The short length of hose that I am replacing (and which I had to cut to remove) had been stretched to fit onto the Jabasco 1 1/2 inch toilet outpipe.
I have been advised to replace the seacock by a larger one as any attempt to fit a sleeve around the existing seacock to accommodate the 1 1/2 inch hose or to get a smaller size hose and stretch it to fit onto the vented loop would run the risk of leaking. I would welcome advice on what is involved in replacing the seacock. My inclination is to bite the bullet and get the seacock replaced by the local boatyard.
I have been advised to replace the seacock by a larger one as any attempt to fit a sleeve around the existing seacock to accommodate the 1 1/2 inch hose or to get a smaller size hose and stretch it to fit onto the vented loop would run the risk of leaking. I would welcome advice on what is involved in replacing the seacock. My inclination is to bite the bullet and get the seacock replaced by the local boatyard.