Cranchi 34 Anodes

[Russ the Diver]

I'm just about to take delivery of a Cranchi Zaffiro 34. The boat is being transported from Windsor where its been used on the Thames and fitted with Magnesium Anodes.
I've not seen the boat out of the water so I'm not sure where all of the anodes are fitted. It has a bow-thruster. I know the location of anodes fitted to each trim tab, two on each leg. and I believe there is one fitted on the transom between both legs. Would there be any fitted on the bow thruster? and hull? or anywhere else?
Russ

 

[Tranona]

The bow thruster will likely have an anode on the end of the shaft secured by a set screw. Quite often a bit of a pig to change as it tends to get stuck to the hub of the propeller. Probably won't be any other anodes as there is nothing else that needs them.

 

[FloridaCranchi34]

I have a hull anode on mine on the port side, about 3 feet forward of the transom. All others are where you mentioned them. Don't forget the pencil anodes in the engines as well. Congrats on the new boat, I'm really enjoying mine. What year is yours? Mine is a '97 but seems to be late '96 production. If you need manuals let me know.

 

[Russ the Diver]

I have a hull anode on mine on the port side, about 3 feet forward of the transom. All others are where you mentioned them. Don't forget the pencil anodes in the engines as well. Congrats on the new boat, I'm really enjoying mine. What year is yours? Mine is a '97 but seems to be late '96 production. If you need manuals let me know.

Sorry for the late response! don't get to the PC much these days too busy playing with the boat!!
"Sheer Calm" is 1997, thanks for the offer of manuals but I believe we have all of them.
Russell