Boat-Stove

martinschulz

New member
Joined
30 May 2001
Messages
35
Location
N 54° 47, 595\' , E 009° 25, 970\'
Visit site
...since I own a very small Gaff-Cutter (24') I always struggle which is the best way to heat the boat in cold days. So far I have used Petroleum-Ovens, but they smell and produce "wet" heat. An alternative would be a diesel-fueled Refleks-oven. But those are pretty expensive.
Then I stumbled over the "Davey & Co" small Hot Pot Stove for solid fuel. The size is only 17 3/4'' height and 9 1/4'' width/length. This stove would just be great for my boat. Trouble is, it is still pretty expensive in Germany (500 Euro).
Is there any chance to get this Stove cheaper (I will be in the UK in April)? Or, can I get one second-hand? Or a Stove approx. the same size (Kabola, Taylor?)?
 

Adrian_Morgan

New member
Joined
26 Jun 2001
Messages
102
Location
Scotland
Visit site
No. S/s, square (4x4x18in) and brilliant. Advertise regularly in mags. Based Hamble. Cost around £400. Charcoal goes in hopper at top, ash drops into bin at bottom. Works at sea, safe, controllable. Have used on HB Sabrina (Craig Nutter owned) and fifie up here in north west.

Have just finished reading Tilman's complete work. Name A C-B rings a bell. Must have been fun. Tell me more.
 

Mirelle

N/A
Joined
30 Nov 2002
Messages
4,531
Visit site
"Baroque" had a Perkins drip feed diesel stove in the saloon. Very unreliable. Probably due to bad location of flue, so it caught the downwash off the mainsail on one tack. HWT had a fairly complete set of different cowl types - Liverpool, H section, etc.

I conclude that the flue should if possible be abreast the mast on the port side and the best head is the H shape.
 

Pelican

New member
Joined
6 Dec 2001
Messages
106
Location
Geneva, Switzerland
Visit site
I too have a Bengco charcoal burning stove in my 24 ft motor sailor. Not only will it burn charcoal, but also driftwood, coal, turf, paper, everything that burns, easy to control and gets nice and snug below decks - no condensation either - unlike gas heaters - it is important to empty the ash tray and clean the (rather small diametre) chimney regularly. Recommend it!
Warm regards
Pelican
 

Castletine

New member
Joined
1 Jul 2001
Messages
99
Visit site
Thanks for the tip - I would never have even thought to look here. I have a potbelly in my 30' wooden motor yacht and after 10 hard years of use it has finally reduced to iron ore. That said it has glowed cherry red with heat and sucks like a ???? which has been fantastic in drying out the boat during the winter months - highly recommended if you want a 'dry' ship
 

martinschulz

New member
Joined
30 May 2001
Messages
35
Location
N 54° 47, 595\' , E 009° 25, 970\'
Visit site
Thanks...

so far for your valuable hints.
1. I've got the Davey (anyone here used it?)
2. There is the Colin Frake Faversham (looks pretty professional - but is expensive)
3. The Bengco heater looks great (except that stainless-steel finish - does anybody here have a price? Is it worth the price?)
4. The Pot-Belly idea (MachineMart) looks pretty cheap (is it cheaply made?)

Any other idea?
 

Trevethan

New member
Joined
26 Feb 2002
Messages
1,152
Location
Singapore
Visit site
Same stove available form Trago Mills int he west country for about £62!

regards,

Nick

She had a deep, throaty, genuine laugh, like the sound a dog makes just before it throws up
 

tilpah

New member
Joined
30 Nov 2002
Messages
19
Visit site
I saw a great stove make from one of those Propane bottles, chopped around so the base became feet, the rim/handle on top the base for the chimney, a door and vents cut into the body of the botttle.
 

bernard_foster

New member
Joined
16 May 2001
Messages
86
Visit site
Have you considered a pot belly wood/coal burner, my brother has one in his cabin cruiser, works a treat, extremely warm, cheap, and you can get rid of your rubbish easily
 

martinschulz

New member
Joined
30 May 2001
Messages
35
Location
N 54° 47, 595\' , E 009° 25, 970\'
Visit site
Pot-belly

I did consider a pot-belly stove and looked around everywhere for it. But then I just bough an antique stove at ebay for only 85 Euro. Its round with a diameter of 22cm and its height is 65cm. It will be delivered next week. More informations then.

Thank for the interest and engagement here!
 
Top