My boat is due to have its boat safety scheme inspection soon
Section on fuel pipes indicates that they should be BS EN ISO 7840
Or SAE J1527 DIN 4798
I need to change pipes on eberspacher and genny
Can only source SAE J30R 6 ( local Road Runner Motor spares ) seems all they suply for cars
...
can anyone give me link to vdo for instalation and operation manual for vdo compass , depth sounder, log etc. Stripped these from flybridge 12 months ago and have lost sketch of wiring details ??any help appreciated
fuel leak reply to makker
Reply to makkers post the boat has not moved for six months and i have pumped off 150 lts fuel tanks x3 all isolated now from each other balance pipe to all three tanks now have about 10 gollons a piece in them
not going down this week end as weather cast awful but...
300 volvos
leaking a gallon a month havnt moved boat for six months doing some work on it on checking biges found leak
3 tanks with balance pipes ? have recently pumped off 150 lt diesel and shut off all three feeds 2 to engines 1 to eberspathcer ? still getting leak
I have a fuel leak ( Diesel ) Getting fuel in the bilge .Ihave put news papers under the tanlk but still cant find leak position ? Is there any product on the market similar to radweld that I can put in the tank to solve problem.
Re: Anodes and personal messages
Thanks every one for the advice I will be in touch with McDuff
as to the p/message it was an old friend from twenty years ago letting me know where he,s at.
Golf
My boat is due for a change of anodes the boat is built from 5mm aluminium plate the existing anodes are circular discs about ten inches in dia and about an inch thick . there are six in all along the hull ,three either side, bolted direct to the hull .
I can see the location of them when I...
Where can i get info on using resins and glass .are there any sites i can download info from or are videos covering the subject available ?
Any help would be apreciated
Re: Fuel forum
Upton marina .. since as far as i can remember ,, 63 p per litre .. can any one beat that for profiteering ? Now owned by tingdene .dread to think what will happen to mooring fees next year
Going to put a new coat of paint on the boat in the next week or so , weather permitting . how soon after painting can I give it a coat of wax . what wax is best ? dont want silcan based..Will be using Toplac paint..