Juggler7823
Member
Has any got the coordinates for the fairway buoy at Wexford. Yes I do know the problems getting in.
Thanks
<hr width=100% size=1>LOM
Thanks
<hr width=100% size=1>LOM
Wexford
- Thread starter Juggler7823
- Start date
kesey
Member
For Wexford:
You could use 52 21.51N 06 20.09W as a waypoint to visualise the Bar Buoy 061 degrees/241 degrees 5 cables.
Wexford HBC will by arrangement provide a launch to guide you in through from the Bar buoy. 00353 53 22039
see P.M.
<hr width=100% size=1><A target="_blank" HREF=http://homepage.eircom.net/~ajpower>http://homepage.eircom.net/~ajpower</A>
You could use 52 21.51N 06 20.09W as a waypoint to visualise the Bar Buoy 061 degrees/241 degrees 5 cables.
Wexford HBC will by arrangement provide a launch to guide you in through from the Bar buoy. 00353 53 22039
see P.M.
<hr width=100% size=1><A target="_blank" HREF=http://homepage.eircom.net/~ajpower>http://homepage.eircom.net/~ajpower</A>
EagerV
Member
Wexford has recently re- buoyed and am told is a big improvement. Now lit. A friendly place well worth a visit.
Nigel, Eager Vega, Kilmore Quay.
<hr width=100% size=1>
Nigel, Eager Vega, Kilmore Quay.
<hr width=100% size=1>
kesey
Member
Roy,
My charts are on my boat, so I'm just working from McMillan Reeds almanac. I looked up the Wexford Harbour Boating Club site and got this:
http://www.whbtc.com/harbour.htm
The bearings 061/241 lead you to/from the first channel marks from the Bar Buoy.
<hr width=100% size=1><A target="_blank" HREF=http://homepage.eircom.net/~ajpower>http://homepage.eircom.net/~ajpower</A>
My charts are on my boat, so I'm just working from McMillan Reeds almanac. I looked up the Wexford Harbour Boating Club site and got this:
http://www.whbtc.com/harbour.htm
The bearings 061/241 lead you to/from the first channel marks from the Bar Buoy.
<hr width=100% size=1><A target="_blank" HREF=http://homepage.eircom.net/~ajpower>http://homepage.eircom.net/~ajpower</A>
[3889]
...
There last year and was told the bouys move all the time - nowhere near where the almanac said. I made it in drawing 1.7m but touched the bar on the way back out - not for the faint hearted!
<hr width=100% size=1>
<hr width=100% size=1>