Norman_E
Well-Known Member
I have a Vetus 55KGF bow thruster. I tested it on leaving the marina in Marmaris, and it was OK. Yesterday I needed to use it to swing the boat round in a confined space in Bozburun harbour in order to put someone ashore. I heard the motor run but there was no thrust so I used a burst of revs in forward to kick the boat round against the rudder, then motored back. Testing it again there was no thrust either to port or starboard and no sign that it was even disturbing the water, but the motor could be heard running.
First thought was a broken shear pin on the motor shaft. Other darker thoughts were a failed gearbox with stripped gears or a lost propeller.
I stripped it down today in a quiet bay. The shear pin is intact. Then I swam and removed the propeller, which was correctly fitted, and cleaned off some light fouling. Another longer swim was needed to put it back. I tested the gears by getting SWMBO to hold the coupling to the motor whilst I slowly rotated the prop, and found nothing amiss. After replacing the motor it is working perfectly.
In effect I have changed nothing yet it now works, Weird or what?
First thought was a broken shear pin on the motor shaft. Other darker thoughts were a failed gearbox with stripped gears or a lost propeller.
I stripped it down today in a quiet bay. The shear pin is intact. Then I swam and removed the propeller, which was correctly fitted, and cleaned off some light fouling. Another longer swim was needed to put it back. I tested the gears by getting SWMBO to hold the coupling to the motor whilst I slowly rotated the prop, and found nothing amiss. After replacing the motor it is working perfectly.
In effect I have changed nothing yet it now works, Weird or what?