lustyd
Well-known member
Yes, but that's a wholly different subject. If you're spraying on wax then yes, you can build up "layers" although in reality it's just one layer getting thicker - that's how wax works. If you're protecting a hull that would be entirely pointless as the wax would very quickly flake off and you wouldn't have a good finish without buffing, and buffing will smush all those "layers" into a single thin one and remove most of the product.You missed my points. Putting multiple coats of mold release wax on is not in case you miss a bit, it's to build up the layer of wax.
You also said "it's important to understand that the wax doesn't get thicker or provide more protection." this is therefore incorrect.