Ribtecer
Well-Known Member
What the title says really, what is the best/correct antifoul to put on a Volvo sail drive unit please?
Many thanks
Many thanks
Volvo Saildrive, Which Antifoul
- Thread starter Ribtecer
- Start date
Seashoreman
Well-Known Member
Always use Trilux.
Tranona
Well-Known Member
Trilux Prop O Drev or Hempel equivalent Ecopower Prop.
VicS
Well-Known Member
As above but you can use any antifouling which is suitable for use on aluminium. These usually contain copper(I) thiocyanate rather than copper(I) oxide.
It is convenient to use a spray can
If Jotun antifouling is your preference then use Aqualine spray.
johnphilip
Well-Known Member
It depends which colour of barnacle food you want to offer the persistant little B..............
I have tried several receipes on my prop & leg and none seem effective. Worse last year, I think that was because the boat was not used often enough.
I have tried several receipes on my prop & leg and none seem effective. Worse last year, I think that was because the boat was not used often enough.
Ribtecer
Well-Known Member
Many thanks for all the advice.
Do you use a primer of any sort, and if so which one?
Thanks again.
Do you use a primer of any sort, and if so which one?
Thanks again.
Tranona
Well-Known Member
If the saildrive housing has its original coating on it then use the primer for the spray can - International or Hempel both have a dedicated primer.
sailorman
Well-Known Member
coveman
Well-Known Member
International do a "Propeller Primer" which should be used prior to Trilux Prop-0-Drev.
NBs
Well-Known Member
Hi,
aluminum boat antifouling paint, Hempels alusafe, other manufacturers also have products. Anything copper based is not good.
NBs
aluminum boat antifouling paint, Hempels alusafe, other manufacturers also have products. Anything copper based is not good.
NBs
Ribtecer
Well-Known Member
All done with a rattle can of Trilux Prop-0-Drev.
Many thanks to all.
Many thanks to all.
stuartwineberg
Well-Known Member
Trilux. However I think it has been discontinued, that said I had no problem getting it online. Sml paints (the jotun people) have their version in a slightly smaller rattle can
Tranona
Well-Known Member
Not discontinued just re-named.
stuartwineberg
Well-Known Member
Really, to What?
vyv_cox
Well-Known Member
Interesting Propspeed article In Focus: Propspeed's CEO on strategy, boat show secrets and Kiwi ingenuity
Tranona
Well-Known Member
Prop O Drev - has been for some time. Not sure where you got that it had been discontinued. Trilux as a paint seems no longer available - perhaps this is where the confusion arises.
ss2016
Well-Known Member
How did the Prop-O-Drev do? Would you recommend it? I used Hempel Ecopower but it was pretty much useless. The Prop-o-Drev contains copper thiocyanate which is a biocide and presumably the copper is in a form that does NOT react with aluminium. Anyone know more? It comes in a spray can which on an outdrive is pretty much essential.
Neeves
Well-Known Member
Velox or Prop Speed. There is a competitor to Prop Speed, variously called Prop Gold and Prop One. From memory the active ingredient in Velox was the same as Trilux, but in a different concentration.
None of these are particularly cheap, all require following the instructions - exactly.
They all require you to use your vessel frequently - they rely on the fouling not having time to gain a tenacious hold.
If you use a silicone based concoction and you find it does not work as well as you had hoped then you need to ensure you remove all the silicone coating - as nothing will stick to it (excepting more fouling). I think Prop Speed sells a product to aid cleaning.
Once your prop, or sail drive, starts to collect fouling you are on a slippery slope - scraping removes the fouling but also the protective coating. A silicone coating is particularly soft.
Jonathan
None of these are particularly cheap, all require following the instructions - exactly.
They all require you to use your vessel frequently - they rely on the fouling not having time to gain a tenacious hold.
If you use a silicone based concoction and you find it does not work as well as you had hoped then you need to ensure you remove all the silicone coating - as nothing will stick to it (excepting more fouling). I think Prop Speed sells a product to aid cleaning.
Once your prop, or sail drive, starts to collect fouling you are on a slippery slope - scraping removes the fouling but also the protective coating. A silicone coating is particularly soft.
Jonathan
Scubadoo
Well-Known Member
Seajet 034 is much better than trilux, straight forward to paint on, I wouldn't say a spray can is essential in my experience.
Baddox
Well-Known Member
That's what we have used for the last 8 years and been happy with it. It contains a 2-part primer that seals the surface and then the AF goes on top. The spray-on antifouls give a flatter, smoother finish which you may prefer for the propeller but they don't seem as durable.
