SYH Scrubbing Grid

Boz

Well-Known Member
Joined
4 Aug 2009
Messages
655
Location
Sth Lincs (Boat in Shotley Marina)
Visit site
Following Sailorman's suggestion, I went to look at the scrubbing grid at Suffolk Yacht Harbour (from the shore). It looks pretty straight forward, but if anyone has used it, are there any potential pitfalls or anything I should know before I give it a go?
 
There are two sides to it; the side nearest the slip has slightly more room to move around, but the depth is the same. If you get in the water before the pad has completely dried, don't forget that the concrete pad has drop down to the mud, probably just underneath your rudder if you go on bows first. Guess how I know?
 
SYH Scrubbing grid.

Plenty of room

Rose-SYH_1.jpg

Rose-SYH_2.jpg
 
i'm also thinking of using it! I spoke to Bob the other day about it and the base is 1m above cd. I draw 2m so need to be a wee bit careful about using it at neapish times.
 
Yes, I know, old thread. I’m just posting this as an update and a correction to info posted above in case people search for info on the grid in future. The base of the scrubbing grid is 1.6m above CD, and not 1 metre as posted above. Cost as of today is £45.
 
Yes, I know, old thread. I’m just posting this as an update and a correction to info posted above in case people search for info on the grid in future. The base of the scrubbing grid is 1.6m above CD, and not 1 metre as posted above. Cost as of today is £45.

Forty five quid? Just to park on a bit of concrete for a few hours? Bloody hell.

Think I'll be sticking with scrubbing off on a beach somewhere and using the money I save on keeping the booze locker in an agreeable stock level instead...
 
Last edited:
£45 not too bad really is it? Round here there are a few beaches to dry out on (which I do use) but the boat will be sitting on mud, not sand and sinks in a bit. On my lift keel boat that sometimes results in the prop and wing keel (Parker 31) being hard to get to. Working on a nice concrete slab is much better for the jobs I’m usually doing, such as greasing prop and getting the pesky barnacles of the keel wing.
 
Top