Recomendation for a 35mm prop shaft supplier greece or england

[Artic Warrior]

Hi All,,,,, ive done some internet searches
but wondering can any one recommend a supplier
for a 35mm shaft with tapered end.

I drive to my boat in Greece from uk
so a supplier any where between the two is fine.

Many thanks

Colin

 

[GHA]

Tried T Norris?

http://www.tnorrismarine.co.uk/product/propeller-shafts/

 

[Artic Warrior]

Ok will check them out.

Thank you

Tried T Norris?

http://www.tnorrismarine.co.uk/product/propeller-shafts/

 

[snowbird30ds]

Or give clements a ring, they did one for me pretty quick but did need the old one to get the exact length taper and keyway.
http://clementsengineering.co.uk/products/marine-stern-gear/propeller-shafts/

 

[Artic Warrior]

Ok and thank you for that too.
cheers

Or give clements a ring, they did one for me pretty quick but did need the old one to get the exact length taper and keyway.
http://clementsengineering.co.uk/products/marine-stern-gear/propeller-shafts/

 

[Bobc]

These people are good.

www.sillette.co.uk

 

[Artic Warrior]

Ideal,,,,, have heard of them,,,ok thank you

These people are good.

www.sillette.co.uk

 

[Tranona]

Ideal,,,,, have heard of them,,,ok thank you

They are the same company as Lake Engineering who actually machine the shafts in Poole. Details for ordering etc are in their catalogue.

 

[npf1]

Vetus do 35mm

 

[RJD393]

+1 for Clements. They made mine from measurements I supplied.

 

[Eeyore]

+1 for T. Norris. Great company to deal with, very helpful.

 

[Minchsailor]

+1 for T. Norris. Great company to deal with, very helpful.

+1 again. Always found them very helpful.

 

[wiggy]

Lancing Marine, top notch.

 

[deep denial]

another vote for Lake engineering in Poole. Very helpful. http://www.lakesterngear.co.uk/

 

[Moffy]

There's Michigan Marine Propulsion in Newton Abbot, 01626 351723. Never used them though.