snowbird30ds

A bilge pump will only push air if a diaphragm type. I'd look for a lift and pressure wash.

From memory the oil sender is 1/8npt and water temp sender is m14 x 1.5.

One good thing about asap is that they will take the time to pick stock and take measurements for you before you buy if you ask, very...

Latency is a delay in sound between hearing aid and speaker that can be annoying.

I wanted to try the bluetooth to hearing aids a couple of years ago and bought an Mpow bluetooth transmitter and changed the speaker out...

Looks good to me, when done let air into the intake side so the water can drop out of the leg and maybe tip some antifreeze down that...

Now with brain back in gear I realise your engine is outdrive with water in and out through the leg so I was probably talking tosh in...

If using containers could you remove raw water pump cover and make a face plate with hose spigot on, take out impellor and shut off...

Sorry but my crystal ball has a flat battery.

Instead of weighing empty calor bottles just read the collar, 4 digits is lb oz, very simple to convert to kg.

Your best friend will be someone with a portable tig welder, idealy weld a nut over the whole lot but the allen bit may make the weld...

Does anyone know the thread on the 2000 series engine switch? I believe mine is M18x1.5 as that is what the sender is (I have an old one...

None yet, boat is 100 miles away and I was going to get a switch till I saw the price, meter comes out next visit and switch gets...

No it's a tmd41a.

Has anyone found an alternative to the volvo penta overheat alarm temperature switch on the thermostat block? One of mine comes on even...