Preparing for an Atlantic Adventure and Beyond......

capnsensible

Well-Known Member
Joined
15 Mar 2007
Messages
49,511
Location
Atlantic
Visit site
Step one. Get a new propellor to replace the one that fell off.....:nonchalance:

Well, bit of background. Mr. T. , owner of a rather nice Bavaria 44, is Australian. Like so many of his countyrmen plus the NZ cousins, buying a yacht in home waters is a struggle. Its becoming a regular thing for these guys to pick up ex charter boats around Greece and take a slow sail home, enjoying the cruise.

So I get a call here in Lanzarote from my old oppo Bob. He is bringing this yacht from its arrival in Gib from Greece down to Lanza and lets meet up for Christmas and please book us in. No problem. They had a good fast sail down just beating some iffy weather. Snag is as they enter the Marina around 2100, engaged astern gear to slow down.....prop dropped off. We were waiting for them anyway on the dock but were able to energise the Marineros and their rib to get the yacht onto a nice and gentle arrival at the boatyard pontoon. Sorted.

Next thing. Following morning, arrange for spares and lift out at very helpful yard. Obviously over the festive season, there will be a wait, but no drama, Mr T has all the time in the world, so 8th Jan for lift.

Of course, a beer or two was always on the cards. 'D'ya fancy a trip to the Windies' says Mr. T. After almost a second to think about it, Yez sez I. Further discussion reveals he is not really on for a Windies tour, he wants to move on. OK how about this? I can get you to Cape Verde, St Lucia, through the Panama Canal to Panama City. Yup, says the man, game on.

Thats the easy bit sorted. Next, what crew? He already has a young German adventurer on for the Transat. Good one, fit chap for the heavy lifting engine, also keen as mustard. Im happy with that but figured a call to another old friend, experienced Ocean sailor and has also done the canal before too would be handy. A very quick YES and flight booked UK to here 19th Jan. Yay.

Now Ive got just under a luxurious three weeks to do the rest. Got some fab advice on here about Garmin Inreach plus to keep in touch with op centre (Mrs Sensible). She will send us weather stuff, football results, cricket scores and book us in for Canal Transit. And join us in Shelter Bay for the trip through. So, ordering that in hand.

The lift will enable me to have a good check out of the boat. Yes Bavaria knockers, its got a keel, the water here is so clear I can see it! I know the rudder has been repaired and strengthened in Greece a few months ago. We will change the outdrive oil whilst lifted too 'because we can'.

Been to Arecife today to start the process of inventory, stuff like courtesy flags etc are so much cheaper there, rest we can get locally, like fuel syphon pump, spare inverter for laptop, sail repair stuff, extra motor impellors, fuel filters, yadda, yadda.

Tomorrow will be the boat inspection and check everything else out. And for once, Im not in a rush. Spares and tools, safety items, bedding and all crew comforts (so to speak) first aid kit and the rest. Im repeating myself but its so refreshing to have time to make good any deficiencies. Hoo Ha.

Then there is stuff like check the anchor windlass works, service the engine, inflate and check dinghy and outboard plus no doubt more.

Confirm insurance for far flung places. Sort charts and pilots. (got some from my boat), get kindle racked to the max!

Up mast. Rigging check.

Victuals. So nice to have use of a car for once!

Two days before the off, out for a sail around, final check on sails and anchor. Back in, top off diesel.

Day before, top off water and fresh food.

Drink some beer!

Then all being well, depart for Verdes on 22nd Jan....thats when Mr.T has paid his moorings to, so good date.

Gonna miss football..........;)
 
Sounds great - we are spending years slowing getting our boat ready for the Atlantic trip, delaying it for another year in Greece, an extra Summer in Croatia, and now a year messing around in the Balearics. Apart from solar panels and a 12v fridge (rather than engine driven as now), we aren't planning on anything that wouldn't keep us sailing safe in the Med apart from a couple of extra friends as crew as a backup for if the utterly reliable autohelm packs up.
 
Couple of things to look out for that I've noticed on the odd occasion a Bav 44 has come to the yard.

One Bav had nothing stopping the nut from working it's way off the end of the rudder shaft.
If the nut falls off the rudder falls out so quite important.
I drilled a hole through the shaft above the nut and fitted a BIG split pin.

On another bav that had come back from the med had a fore hatch that opened front to back rather than back to front.
Apparently quite a lot of med boats do this ti encourage airflow through in hot conditions.
Trouble is in ocean conditions it can act as a sink fast method.

As the the rigs are mainly fractional with raked spreaders they tend to not spend too much money on the backstay chain plates.
As you will spend a considerable time sailing downwind in the trades I'd investigate these plates and satisfy myself that they are man enough for extended downwind sailing.

As an aside, make sure that you get the right prop for your rotation.
One of our customers sailed down to Cape Horn and back and on his return we did an engine swap and noticed that he had a left handed prop on a right handed gearbox.
Must be a record, as there can't be many boats that have done that kind of distance, backwards!
 
Top tips, ta. Will specially look at rudder and backstay, not really considered that on other Bavaias (a 42 and a 46) Ive taken long distance.

I gave the engine serial number and the outdrive serial number to the agent in the boatyard here so hopefully they will get the correct one. Have heard of the same problenm on other 44's of the same era dropping propellors. Best the yard get this one right!

Mr. T has the forward cabin, he has responsibility for his hatch!
 
A bit of a crawl round has revealed that the rudder stock has a substantial autopilot clamped around it, so thats OK.

The split backstay looks good and solid from the outside with a stainless plate and four fair sized bolts each side. The backing plates inside though could be better. Will keep a good eye on them, thanks. Not expecting much upwind stuff however, so the tensioner can remain wound off a good bit.

Had a good rummage around all over the yacht today. Very well maintained and Ive seen a list of all the work that has been carried out since Mr. T took ownership. Well happy. :encouragement:
 
The propeller falling off a Volvo Saildrive is common if installed incorrectly (as it apparently is by many boatyard workers). There is a cone and a locking bolt. The locking bolt must be installed with Loctite threadlocker, else it can vibrate lose and if it goes missing, the cone will eventually undo and the propeller gently slide off the shaft and go explore on its own. No problems when installed correctly. Do not over-torque the cone, and also grease the propshaft for easier removal next time.

From my notes for our Saildrive 120S-E:

Prop shaft housing: Loctite on bolts (allen), then 30 Nm

Drain plug, soak fibre washer in oil for 15 minutes before installing. 10 Nm

Anode bolts (flat blade) 12 Nm

Propeller cone 70 Nm - grease splines first
Cone lock bolt 20 Nm - with Loctite on threads

The rudder top nut has a slit sideways with a bolt to compress it, locking it against coming lose. Just check the bolt is tensioned.
 
Thats great thanks, and much appreciated. I suspect at the last lift- in a Greek Yard- the propellor may not have been put on correctly. We are getting the yard here to do the job so we have a warranty with the repair, its a late afternoon lift and hold in the sling job on tuesday or soonest after when the parts arrive.

Meanwhile, most of the other bits and pieces we need for the crossing have been bought or ordered, so the plan is, so far, going well.
 
You might even get a chance to practice some 'electronic navigation' :)
Have a good trip.

;)

Yeah, this trip will be leaving the sextant behind. Its not so much that, its the tables and everything else! We will be well electroniced up, plus I know the way......:encouragement:
 
The lift will enable me to have a good check out of the boat. Yes Bavaria knockers, its got a keel, the water here is so clear I can see it! I know the rudder has been repaired and strengthened in Greece a few months ago. We will change the outdrive oil whilst lifted too 'because we can'.

We were parked in the yacht club yard in Bilbao one winter watching the maraneros strengthen the rudder on an old Britsh motor sailor. Guess how they did it? Simple - they used mild steel nails to tack some hardboard to the outside of the existing rudder and then the laminated with a couple of layers of grp. To them this wasnt bodging - I saw them repair a small local wooden fishing boat the same way with mild steel nails and softwood planks.

Caveat emptor.
 
We were parked in the yacht club yard in Bilbao one winter watching the maraneros strengthen the rudder on an old Britsh motor sailor. Guess how they did it? Simple - they used mild steel nails to tack some hardboard to the outside of the existing rudder and then the laminated with a couple of layers of grp. To them this wasnt bodging - I saw them repair a small local wooden fishing boat the same way with mild steel nails and softwood planks.

Caveat emptor.

Some yards..... worth watching.

On this rudder, the surveyor figured it was full of water. Test drilling proved it. So the rudder was split, dried, foam filled and rebonded. signed off by the surveyor. But we all know about the trials Neptune sends us! :)
 
!

Mr. T has the forward cabin, he has responsibility for his hatch!

We originally had our yacht coded so it could be chartered. The forward hatch opens up with the hinge at the rear. Great for ventilation.
The coding surveyor insisted that we had a blank made to be kept on the boat so that if/when the hatch came loose and was lost, we could make the boat water tight. Not a difficult thing to have made up. I big square piece of laminate to go outside and a transverse brace to go inside the hatch. It still lives in the cupboard in the forward cabin. Something you might consider getting made up?

TudorSailor
 
Thanks. Have had a few coded boats, one of the arsiest jobs is turning the hatch round. Have also made blanks with a strongback.

All things in, Im just gonna make sure he shuts his hatch! :)
 
Thanks. Have had a few coded boats, one of the arsiest jobs is turning the hatch round. Have also made blanks with a strongback.

All things in, Im just gonna make sure he shuts his hatch! :)

I actually used the blank when one of the hinges failed. It is a Lewmar hatch and they had a product notification about the bushes in the hinge. They were originally plastic and the designed was changed to metal as they kept breaking. I subsequently changed them in all the other hatches.

TS
 
Wonder of wonders, propellor arrived. Lifted out an hour ago, Mr. T has a night in the slings to look forward to whilst the loctite goes off.

For me great to inspect hull and fittings, all in very good order.

Splash at nine, whole project coming together. Garmin Inreach arrived today too.

Thanks everyone who have been offering tips! :encouragement:
 
Expect the unexpected. :)

Fab job by yard, splashed back in and a nice tootle over to the proper marina berth in very light breeze. Quite a few boats around with people languidly lounging in the sun. Perfect posing oppurtunity to dock with panache. Standard achieved!

So, with a nice warm engine and my Perla oil vacuum pump onboard and the boat all secured, I decided to change the oil and filter. No worries.

Had also invited my wife over to get the Garmin Inreach registered etc and do a bit of training ourselves with it. As an experienced transatlantic sailor and Font Of All Knowledge, she will be our weather router, etc.

However, what I dint expect to find out was that I 'am wearing completely the wrong clothes to do an oil change in'.

Oooer. :ambivalence:
 
We are now at the nearly ready to go bit. Everything is fixed and serviced. Dinghy and outboard checked for Cape Verdes. Rigging inspected. Most of the victualling complete.

Luxury today, had quite a lot of 5l bottles of water delivered too the boat! Brill. Normally a hard yakka job.

Last crew arrives tomorrow. Sunday trial sail, diesel up.

Monday morning top off fresh water tanks, collect fresh fruit and veg, slip and proceed. Looks like a nice two or three windy days to get going. Trades across maybe about to play ball too! :encouragement:
 
Top