Dave 71
Well-Known Member
My boat, a Hanse, has a ST Jib. We've found it works well for us and like it. Experimentally, as a test of its down wind (lack of) performance I've tried it jib only. It did make the boat move, gave steerage and as we were not in a rush, was not a complete disaster. Having it bang from side to side is annoying, though
Longer term, I think a good combo for my boat would be an asymmetric on a furler. I have the sail, but I'm reluctant to spend the cash on the furler right now as it's something that probably will only be used infrequently and want to make best use of what I've got.
Can a ST jib be poled out? I Have a pole, but if I'm honest not 100% sure how to set it up. I've seen it done, although fudged with a boat hook but not actually done it with a proper pole. I'm wondering if the pole would just swing across when the sail gybes rather than keeping the sail out to one side, so presumably some kind of preventer line needed.
There are stops on the ST track that can be used to hold the car in place. Normally these are out the outer ends of the track but could be moved across and used to prevent the car from moving along the track. I am wondering if the pins that lock in place are man enough for the job. There is no mention of the intended function of these in the manual. Are they intended to stop the sail tacking, could these be used in combination with a pole? And maybe even heaving to?
I'm not really looking to maximise performance so I'm not that fussed about the performance aspect. I'd like to learn the technique, stop it banging and, well, boats look good goose winged! We did try main only at the weekend and found the boat rolled a bit (there was a bit of a sea running) which was not completely comfortable, so rolled the jib back out. It did help dampen the roll.
Longer term, I think a good combo for my boat would be an asymmetric on a furler. I have the sail, but I'm reluctant to spend the cash on the furler right now as it's something that probably will only be used infrequently and want to make best use of what I've got.
Can a ST jib be poled out? I Have a pole, but if I'm honest not 100% sure how to set it up. I've seen it done, although fudged with a boat hook but not actually done it with a proper pole. I'm wondering if the pole would just swing across when the sail gybes rather than keeping the sail out to one side, so presumably some kind of preventer line needed.
There are stops on the ST track that can be used to hold the car in place. Normally these are out the outer ends of the track but could be moved across and used to prevent the car from moving along the track. I am wondering if the pins that lock in place are man enough for the job. There is no mention of the intended function of these in the manual. Are they intended to stop the sail tacking, could these be used in combination with a pole? And maybe even heaving to?
I'm not really looking to maximise performance so I'm not that fussed about the performance aspect. I'd like to learn the technique, stop it banging and, well, boats look good goose winged! We did try main only at the weekend and found the boat rolled a bit (there was a bit of a sea running) which was not completely comfortable, so rolled the jib back out. It did help dampen the roll.
