Plastimo 406/608/810 Spar Section and Plastic Insert

[wot]

Does anyone have a section(even half a section) of Plastimo spar and liner sitting idle?
A joining section would also be useful....

I need to add at least another half section of spar to stop twist and get proper tension on the halyard.

Happy to swap for some folding readies....

 

[theforeman]

i may be able to help. give me a day or two to check things out.

 

[wot]

It would be appreciated if you can help. Thanks for taking the effort to look anyway.

 

[theforeman]

i haven`t forgotten you - just having a few distractions at the mo hope to let you know tomorrow.

 

[NorthUp]

I have a 900mm section here, with 1370mm of liner.
No joining link.
But I'm at the other end of the country..... any use?

 

[theforeman]

i spent a bit of the morning drilling out rivets but as i am on my own i cant separate the section as yet. hopefully tomorrow.
i see north up has a section. i`m not quite at the other end of the country but i can have it taken to the exeter area if that is of assistance.

 

[wot]

Many thanks to all that responded. The generosity of people on this forum towards others they have never met is always a source of wonder. TheForeman has was able to help with my request - so many thanks.
Now to get it fitted!

 

[theforeman]

glad it worked out. happy sailing.

 

[The Dr]

Needed plastimo 810 spar section

I am short of 400mm of this spar section as I have just managed to lower the drum, be pleased to pay reasonable price rather than the £54 per section!
Thanks in anticipation.......

 

[The Dr]

plastimo insert

I have the insert do you have any foil spare please
regards

 

[NorthUp]

foil

PM me your address, I still have a section available.

 

[l'escargot]

I have the insert do you have any foil spare please
regards

I have some twin groove if that is any good?

 

[The Dr]

Hi thank you for your reply will pm e-mail
Kind regards
Frank

 

[The Dr]

Thank you for your reply very appreciated but twin will not fit. Thank you again
Regards