Oil change pumps

dralex

New member
Joined
9 Jun 2004
Messages
1,527
Location
South Devon
Visit site
I am now in the realms of servicing my own engine and wonder if people have and specific suggestions for the pump to use for oil extraction. I've found electric ones and manual ones ranging from £25- £60, but am not sure if there is much difference between them.

Cheers

Alex

<hr width=100% size=1>Life's too short- do it now./forums/images/icons/wink.gif
 

pvb

Well-known member
Joined
16 May 2001
Messages
45,603
Location
UK East Coast
Visit site
Pela 6000...

I bought a Pela 6000 this year from <A target="_blank" HREF=http://seamarknunn.co.uk/catalog/items/item439.htm>Seamark Nunn</A> for £30. Great value piece of kit! Sturdily constructed. Very clean, too - can change the oil without covering the boat in newspaper first.

<hr width=100% size=1>
 

dralex

New member
Joined
9 Jun 2004
Messages
1,527
Location
South Devon
Visit site
Re: Pela 6000...

That's great because that's one of the cheaper ones. Thanks.

<hr width=100% size=1>Life's too short- do it now./forums/images/icons/wink.gif
 

Capt_Scarlet

New member
Joined
9 Nov 2001
Messages
152
Location
Oxfordshire, England
Visit site
I use a drill powered pump from a car accessory shop, about £6, with some plastic tube to 6mm (?) copper tube to fit down the dipstick and into the waste oil can - both heavy enough to ensure pipe stays put.

Also doubles as a diesel transfer pump.

<hr width=100% size=1>
 
Joined
16 May 2001
Messages
4,187
Visit site
Re: Pela 6000...

Great piece of kit. Thoroughly controllable and it has a built in reservoir.

I once had the pipe come off an electric one when the hot oil softened it. Sprayed black oil all over the white carpet lined aft cabin of an almost new boat before the pump stopped after switching off.

The Pela is also useful for sucking water out of otherwise inaccessible places all around the boat.

Steve Cronin



<hr width=100% size=1>The above is, like any other post here, only a personal opinion
 

cliff

Active member
Joined
15 Apr 2004
Messages
9,468
Location
various
Visit site
I use a little brass manual pump buoght from local swindelery for £12 - yes twelve pounds and it works fine. Unless you have gallons of oil to pump out and are doing it 3~4 time a season it seems a little OTT to go for electric pumps - I can always fine other things to spend money on when it comes to the boat.

1032.jpg


Something like this but without the "ear muffs" and with a couple of different sized suction pipes

<hr width=100% size=1>
hammer.thumb.gif
 

Evadne

Active member
Joined
27 Feb 2003
Messages
5,752
Location
Hampshire, UK
Visit site
That's what I use for my 1GM. I'm sure the Pela is very good but as long as the oil is warm and you don't lose the tube down the dipstick hole these do the same job. They are even cheap from Nauticalia. The tubes do go hard and crack, so need replacing from time to time, and after 10 years the seals on the pump go.

<hr width=100% size=1>
 

dralex

New member
Joined
9 Jun 2004
Messages
1,527
Location
South Devon
Visit site
Thanks Cliff- I've seen similar brass ones. I think if I can find the Pela for £20, I'll go for that.

<hr width=100% size=1>Life's too short- do it now./forums/images/icons/wink.gif
 

cliff

Active member
Joined
15 Apr 2004
Messages
9,468
Location
various
Visit site
Aghhhh. Yoiu mean to say I might need to get new seals after another 8 years and I might need to change the plastic tubes sometime in the future. OHHH drat more expense, must start saving up for that - I mean a yard new 1/4" or 3/8" plastic tube must be , oh what? 50p maybe tops and rubber washers??. Sod the washers I'll buy another cheapy pump in 8 years. /forums/images/icons/wink.gif

/forums/images/icons/smile.gif

<hr width=100% size=1>
hammer.thumb.gif
 

Roberto

Well-known member
Joined
20 Jul 2001
Messages
5,378
Location
Lorient/Paris
sybrancaleone.blogspot.com
on compass website the picture is that of the spherical pela pump, but the product description calls it "vacutank" which is a different product

when you order you get the same pela in the picture or<A target="_blank" HREF=http://www.curtismarineint.co.uk/Chandlery&Hardware/Listings.htm#05060> this vacutank</A> ?

thanks


<hr width=100% size=1>
 

Miker

New member
Joined
30 Jun 2001
Messages
890
Location
NW England
Visit site
Re: Pela 6000...

Thanks. You've also convinced me. I was going to ask for recommendations for a pump which also sucks up water.

<hr width=100% size=1>
 

Roberto

Well-known member
Joined
20 Jul 2001
Messages
5,378
Location
Lorient/Paris
sybrancaleone.blogspot.com
Re: Pela 6000...

***The Pela is also useful for sucking water out of otherwise inaccessible places all around the boat.***

like for example from the bottom of the fuel tank..!

I'll buy one as well, if it's pela 6000 and not vacutank




<hr width=100% size=1>
 

ditchcrawler

Well-known member
Joined
7 Oct 2001
Messages
1,717
Location
River Orwell,East Coast
Visit site
Re: Pela 6000...

I have checked the number on the website against the number in my Compass catalogue & although it does say Vacutank on the website the number is the Pela 6000 as is the description.

<hr width=100% size=1>
 

Miker

New member
Joined
30 Jun 2001
Messages
890
Location
NW England
Visit site
Re: Pela 6000...

B*gger! I hope that you are wrong as I've just paid £10 more for one I've ordered from Seamark Nunn.

<hr width=100% size=1>
 

pandos

Well-known member
Joined
15 Oct 2004
Messages
2,995
Location
Ireland, (Crosshaven)
Visit site
Re: Pela 6000...

Just a little piece of advice that might get somebody out of trouble some day, I have used it and It really works. One can use these vacum pumps to bleed the fuel system, You can litterally suck the air and fuel right through, as far as the injectors.

<hr width=100% size=1>
 
Top