Furlex roller reefing

[DaveAlpine]

I am in the process of replacing standing rigging and having difficulty dismantling the roller reefing to replace the fore stay. I have removed the furling drum and the norseman fitting, but cannot see how to dismantle the lower part. Should it just slide off or is there a locking mechanism somewhere?
Any suggestions?

When replacing swaged fittings what is the difference between the types of T-Terminals avaialble - can I fit a flat-head T-terminal on a Kemp mast?

I have no access to professional riggers so have to do the work myself!

Any suggestions welcome

Thanks
Dave

<hr width=100% size=1>

 

[dickh]

I believe Furlex do an exploded picture of their equipment - try their website - Seldon? - they are usually helpful if you contact them by phone.

<hr width=100% size=1>dickh
I'd rather be sailing... /forums/images/icons/smile.gif

 

[quaelgeist2]

The Selden / Furles site.

http://www.seldenmast.com/

Look up Furles - Manuals. All online as pdf to be downloaded and checked in detail offline.
Although I have a Furlex myself, I have no clew as to the steps you''d need - hints welcome!

chris

<hr width=100% size=1>

 

[quaelgeist2]

The Selden / Furles site.

http://www.seldenmast.com/

Look up Furlex / Manuals. All online as pdf to be downloaded and checked in detail offline.
Although I have a Furlex myself, I have no clew as to the steps you''d need - hints welcome!

chris

<hr width=100% size=1>