Engine deals

[shetland]

I am re-engining my boat,and i am looking for a good quote on a Mercruiser 135.

The best i have seen so far is from Aqua marine in Sheperton.

Does any one know of a dealer in the south of england who can supply a competetive quote on a Mercruiser engines.

Also recomendations regarding a company who could make a custom built stainless steel fuel tanks would be miuch appreiciated.

<hr width=100% size=1>

 

[alb40]

Try ASAP supplies in Beccles for stainless tanks. Fax them a drawing and they will quote. Website is www.asap-supplies.com

<hr width=100% size=1>

 

[Althorne]

Try Lancing Marine, Portslade (Brighton). 01273 410025. They offered me a a brialliant deal (£2000+ better than others) and have all the knowledge and know-how to prevent or solve any problems. Always available on the phone and very helpful.
Good luck.

<hr width=100% size=1>

 

[longjohnsilver]

Rob Perry based at Lyme Regis may be able to help. Certainly worth giving him a ring, 01297 631314.

<hr width=100% size=1>

 

[Freebee]

having decided that I cant afford 2off 1.7dti I am also looking for two 135 engine drive packages, are you getting yours fitted or doing it yourself?

<hr width=100% size=1>

 

[pistonbroke]

The best price I've heard of in the last few months(other than OEM) is from Keypart in Watford. £6450 for a complete package!!!!!!! or petrol 130hp for £3750

<hr width=100% size=1>

 

[shetland]

The work will be carried out by a Mercruiser dealer as i am not to sure about the waranty if it is diy.

As my previous post Aqua marine are advertising Mercruiser 135 engines at £4905 inc vat, and £80 delivery to the south coast.

<hr width=100% size=1>

 

[martynwhiteley]

I fitted the D1.7L myself, and the warranty was ok if you got a merc mech to check the alignmnet and general installation. (cost me fifty quid).

A complete package with Alpha 1 gen 2 drive and power steering etc. should be securable for a little over £8K inc. vat. (about £1500 below list). I may be able to help secure such a price from the local dealer if interested.

The petrols a lot cheaper, partly due to only raw water cooling, but the downside is much higher internal corrosion potential.

<hr width=100% size=1><font color=blue> <A target="_blank" HREF=http://www.mboat.org>http://www.mboat.org</A></font color=blue>

 

[Freebee]

so if I buy 2 135 from keypart does anybody know someone in the poole christchurch area that would fit them? i dont have the time.

<hr width=100% size=1>