Cutting Corion

[Blackfeather]

We may be making some adjustments to our galley which will probably involve making a larger hole in the Corion worktop. Does anyone have any experience of this and whether it is straightforward? Is it possible to use a jigsaw and what type of blade etc?

Thanks in anticipation........

 

[maverickofpoole]

Have a look at the following link

http://www.naturalhandyman.com/iip/infcountertop/infsolidsurface.html

Martin

 

[Talulah]

You'll need Tungsten carbide covered jigsaw blades. About £30 for 3. Alternatively use Tungsten router bits if you can get the router in the space.
Make sure the surface is fully supported.
Use wet and dry to then sand the edges.

 

[Blackfeather]

Thanks all, very useful.