B&G Zeus 2, how to get radar overlay?

[Lucky Duck]

Trying to get the plotters to show the radar on the chart page but the manual isn't very informative and my ad-hoc attempts haven't met with success

Can anybody advise?

 

[wizard]

Trying to get the plotters to show the radar on the chart page but the manual isn't very informative and my ad-hoc attempts haven't met with success

Can anybody advise?

Tell me when you are next down on the boat and I will show you.

 

[Martin_J]

Press the power button briefly ... a popup should appear with the option "radar transmit"

 

[Martin_J]

The above assumes you have a heading sensor on the network and that the screen doesn't show 'radar overlay invalid'..

 

[Lucky Duck]

Press the power button briefly ... a popup should appear with the option "radar transmit"

Thanks, will try that tomorrow, I had assumed that you were able to switch the overlay on and off like range rings, lay lines, etc.

 

[Lucky Duck]

Tell me when you are next down on the boat and I will show you.

Will send a PM

 

[Lucky Duck]

Thanks, will try that tomorrow, I had assumed that you were able to switch the overlay on and off like range rings, lay lines, etc.

Sorted, it's in the menu function while in the chart page rather than in the overal settings menu....

 

[Greg_w]

Hi. Acknowledging this is an old post but can someone tell me how you change the transparency of the radar overlay on a Zeus2?