Ais /nmea out

[pandos]

I have an icom Ais transponder/receiver with a small screen. This is what I wanted so only one thing to keep running and no little wires or wireless-ollogy ( my new word)

I also have a tablet and other things that run Navionics and I have a yakker which afaik could take Ais nmea and put this into the wifi and allow my touch screen to show the Ais targets.

Below is the page from the handbook. Can any wise ones tell me if this Ais machine outputs the correct flavour smoke to allow my yakker to send Ais stuff to my tablet over wifi?

 

[prv]

Yes. The VDM sentence is what you want.

Pete

 

[pandos]

Yes. The VDM sentence is what you want.

Pete

Excellent,

Now I just need to find the 15 pin connector? I can probably just stick a single wire in the hole to try it out...

 

[DAVAIS]

Guess you need at least two wires(GND and TX)? Good luck!

 

[pandos]

sorted, found the NMEA logger on the Yakker particularly useful, although I did not actually see any targets on Navionics, it showed connected and receiving ais..