Daverw's latest activity

Any which have option to freeze will be compressor systems

We bought totalfreeze 45 portable last year, 240v and 12v fridge or freezer, absolutely brilliant, control via front pad or Bluetooth...

Im using these, bought direct from UK manufacturer, the first set were ok but I was then sent a replacement set FOC as they had found a...

I did for a while use the unbranded filter that came with my Racor copy housing, when I next changed the filter I got replacement from...

Yes your correct, it’s the other way round you cannot

According to Navionics help page Advanced features including enhanced routing with our navigation module and Auto Guidance+ are...

I think it’s plotter sync that you loose, which I find usefull as it updates the plotter charts each time without me taking card out and...

I use the small self adhesive pads, peal off backing as normal but use CT1 to stick, works well

We are talking about crimped hose fittings and valves etc not rigid pipe and compression fittings

Most internal pipe threads are parallel and mail threads can be both and as long as the tapered thread don't bottom out in the internal...

That’s what I do with tape or cord, always start away from start of thread to keep it tidy very common requirement and not normally any...

If you need to mate a male tapered thread with a female parallel one, you can create a pseudo taper with tape or cord by increasing the...

loctite 55 ptfe cord or my preferred loctite 577 as it seals and sticks as well

Same coming back over the Atlantic. If its cold and they speak Norwegian, turn south. If its warm and they speak Spanish, turn...

M18 drain plug and some tube: There is the breather hole just below the bottom of the plug, one in the nut at the end, and it needs an...