Daverw's latest activity

I would first check for corrosion in the coax to antenna, we had similar issue about 4 years ago and when changed antenna I open up the...

This was my main reason to upgrade, I was always keeping cars back and only moving them forward as far as I could easily reach which was...

It sure about a jammer but Barton do a range of fittings for 25mm T track, fitted my upgrade yesterday and today fitted new sheets,

I cannot remember the exact size but would likely to have been m5 as this would clear the grub screw hole, I only drilled one side so as...

Like others have said on older boats it is mounted so as to give a good run between the engine and morse lever. Mine is mounted like...

I drilled and tapped, using button head bolts and cut off to correct length, looks tidy

A couple of years ago I went into a stainless fabrication shop and saw them use some sort of electric wand device for cleaning their...

I think I’ve seen them at decathlon so my be worth a look

I did try jury rigging BH with low friction rings, did work but they kept banging on the deck and side windows when on windward side

It really is bad when it's not right. I don't mind adjusting the pins when sailing with someone else on a nice day -as you say, tack by...

That’s my reasoning as well, just fitted the Barton sliding cars today, took longer to do the eye splicing on the lines to fit the cars...

Yes 800w each, we chose them because of this, they work well and are still quicker than gas, we find at home we really use ours above...

Vango Sizzle Double Induction Hob https://amzn.eu/d/4HOh8zz

We at Hull Marina have similar, on line account allocated to our pontoon tower, top up online and at anytime see daily usage and actual...

I’m just about to do this, found Barton sliding cars fit my 25mm t track, two cars and end stops with pulleys cost £280, not to bad...