Recent content by brianrunyard

Have a word with Lancing Marine. They'll be able to tell you which engines are suitable for your outdrive and you can also see which engines they can supply marinising kits for.

Doesn't look like any Sunseeker I've see here in Poole.

The original post stated that both were set to the same datum. More likely one displaying seconds and one displaying decimals.

Nonitoo Tuesday...???? [ QUOTE ] Well it's back now (am Tuesday) !!!! [/ QUOTE ] What time zone is Kent in then??? The 19th May is Monday in Dorset!!! Or is 07:43 a bit early for you? Edit " I should have read he other posts before answering"

Low oil pressure My boats have always had a buzzer connected in parallel with the oil warning light for low oil pressure. Hence they sound when you switch the ignition on, but go out as soon as you start the engine and the oil pressure rises.

[ QUOTE ] I am having to replace my Tricolour Mastead/Anchor Aqua Signal mast head light and need to be able to control navigation or anchor light on separately. There only appears to be one cable at the mast head and I am wondering how it can be controlled via one cable. It doesn't help that...

No, some are Ford, GM etc. Volvo paint them green and double the price. The Perkins Prima, produced by Perkins, when marinised by Volvo was sold as the MD22, Perkins supplied the same engine unmarinised to Austin for use in the Sherpa van and Montego car.

Fully support it. nm .

Pipes to tabs should be equal length. Bennett info and technical assistance Here. Tom (Tabman) is the expert.

100w divide by 24 = 4.16 amps So at 12v it'll draw 8.32 amps Better to try and swap for a 12v version. Otherwise an inverter to convert to AC, transformer to increase the voltage and rectifier to get back to DC, with loses at each stage.

Like this

They're only predictions. The only accurate tide tables are the ones published after the event!!!

How you going to get this into a liferaft? Or did you mean EPIRB?

Owners Manual If you look on my site Here you can download the owners manual.

Re-read the original question; You'll see he asked for valve clearances AND injector clearanes!