Would anybody like a momento of the old Woolverstone Marina?

sailorman

Well-known member
Joined
21 May 2003
Messages
78,887
Location
Here or thertemp ashore
Visit site
Seasoned
hahaha_zpse95e6bdc.gif
 

jerrytug

N/A
Joined
31 May 2006
Messages
3,775
Location
Lorient
Visit site
I have sent them an enquiry, as I will be building a new workshop soon. A material which is harder than oak, after seasoning under water, would be of great interest, not least to the botanists at Kew Gardens...
'Greenheart' could be anything, so I have asked for the Latin name and the moisture content, as it's not cheap. But I doubt I will get a specific answer, it will almost certainly be a load of soggy softwood.
 

pvb

Well-known member
Joined
16 May 2001
Messages
45,603
Location
UK East Coast
Visit site
I saw this pile of old piles on the side of the road to Woolverstone a couple of months ago, and looked up the online ad. Seems optimistic!
 

sarabande

Well-known member
Joined
6 May 2005
Messages
36,050
Visit site
hmm... greenheart is usually oak, but if 'pickled' in brine before use, they could even be elm - which would be almost everlasting.


£250 each is a bit steep, though.
 

davidwf

Active member
Joined
30 May 2001
Messages
1,259
Location
East Coast, Woolverstone
Visit site
Its not Oak see http://www.wood-database.com/lumber-identification/hardwoods/greenheart/

see the comments "Greenheart logs are reported to occasionally violently split apart upon sawing—sending pieces of the wood flying. As a result of this unusual characteristic, sawyers wrap chain around the sections of the log that have already been sawn"

Some of it has been up for sale over three years now.
 

Keith 66

Well-known member
Joined
21 Jun 2007
Messages
1,737
Location
Benfleet Essex
Visit site
Greenheart is one of the hardest most durable timbers known, each of the square piles is approx 71 cu ft, at the price advertised approx £3.53 per cube.
Try getting a price for new Greenheart. Best be sitting down.
Mind you the stuff is so hard that even carbide tipped tools dont last long on it so their isnt a lot you can do with it unless you need some piles!
 

PetiteFleur

Well-known member
Joined
29 Feb 2008
Messages
5,107
Location
Suffolk
Visit site
Many years I was designing sawmills and I can assure you greenheart is exceptionally hard and difficult to saw. Traditionally greenheart logs were 'squared' by men using an adze. They were never sawn(in my day anyway) and if you look carefully you can usually see the adze marks. I can remember trying to saw greenheart, a log about 20" diameter - the bandsaw blade managed about 18" into the log and the wood clamped the blade so tightly it stopped a 60hp electric motor.
We then sold adzes....... and as said is highly durable and v expensive.
 
Top