Windex

[PabloPicasso]

Start again. I have a windex in my shed. When I climb the mast what is the procedure for fitting. Will I need to drill a hole, in what, rivet or bolt etc.

 

[sailorman]

http://www.windex.se/windex_15.html

 

[VicS]

You dont say which version of the windex you have . Several sizes as you will see from sailormans link.

I suggest you identify the model and Google for fitting instructions if you have mislaid the originals.

You may have to fabricate a bracket so take some bits of aluminium , a bench with a good vice, a drill press and a good selections of hand tools up there with you.

 

[VicS]

You dont say which version of the windex you have . Several sizes as you will see from sailormans link.

I suggest you identify the model and Google for fitting instructions if you have mislaid the originals.

You may have to fabricate a bracket so take some bits of aluminium , a bench with a good vice, a drill press and a good selections of hand tools up there with you.

My "windex" is in fact a Hawk http://www.hawkmarineproducts.com/wind.htm

I made a bracket from a piece of aluminium angle


When I first fitted it it was mounted to one side of the mast.........I found that difficult to get along with so altered the bracket so that it is now central

 

[PabloPicasso]

Central mount. Hmmm good. I have a bracket in S/S . I'm hoping I can find a hole or drill one in the mast top plate if there is one. Well see. Thanks for the responses

 

[Daydream believer]

I have one which is integrial with the aerial