Scotty_Tradewind
Well-Known Member
Prior to varnishing all the inside of my Twister, I lightly prepped all surfaces
1. By cleaning down thoroughly with baby wipes to clean and degrease.
2. wiping over lightly with acetone
3. wiping over with ESP see http://www.upkeepers.co.uk/Product/ESP-Primer-Owatrol
Then I varnished...
4. Varnishing with 10% thinners any dry areas requiring priming, repeating until a gloss is formed o surface.
5. varnish 2 coats with chosen varnish.
I used Le Tonkinois.....
https://www.google.co.uk/search?sit...3.0....0...1c.1.35.serp..2.11.918.zHXXm3SEqO4
1. By cleaning down thoroughly with baby wipes to clean and degrease.
2. wiping over lightly with acetone
3. wiping over with ESP see http://www.upkeepers.co.uk/Product/ESP-Primer-Owatrol
Then I varnished...
4. Varnishing with 10% thinners any dry areas requiring priming, repeating until a gloss is formed o surface.
5. varnish 2 coats with chosen varnish.
I used Le Tonkinois.....
https://www.google.co.uk/search?sit...3.0....0...1c.1.35.serp..2.11.918.zHXXm3SEqO4