What's it called?

[Graham_Wright]

I need some hinges for the heads cabinets. I want the screwed flaps to be on the back of the cabinet and the back of the door with the hinge pin at the junction at the front. (It makes sense to me but we'll see!).

I thought double cranked were the ones but they are not.

Any help please?

 

[Boathook]

Something like this in the link?

https://www.force4.co.uk/force-4-folding-table-hinge.html?sqr=hinges&

 

[nrcoyle]

description sounds like a wrap around hinge

 

[penberth3]

Cranked or Offset?

 

[rogerthebodger]

I need some hinges for the heads cabinets. I want the screwed flaps to be on the back of the cabinet and the back of the door with the hinge pin at the junction at the front. (It makes sense to me but we'll see!).

I thought double cranked were the ones but they are not.

Any help please?

This is a double crank but what I think you are looking for is hinges where the crank goes opposite ways.

If that is what you are looking the inge above could be modified by removing the pin and turning the one flap upside down to change the direction of the one crank

 

[Graham_Wright]

This is a double crank but what I think you are looking for is hinges where the crank goes opposite ways.

If that is what you are looking the inge above could be modified by removing the pin and turning the one flap upside down to change the direction of the one crank

Yes - correct - I've done that on the camper but it is not a very strong solution and I have yet to find stainless ones.

 

[Graham_Wright]

description sounds like a wrap around hinge

A search for wrap around hinges was a success and also lead to "inset hinges".

Now to find in stainless.

Thanks to all.

 

[pvb]

Now to find in stainless.

Hallberg Rassy sell stainless lift-off inset hinges which would do the job. See http://www.hr-parts.com/contents/en-us/p2353.html

 

[vyv_cox]

On my phone I cannot see the images, only a notice that says 'stop - this image was hotlinked'. I assume others can see it. Odd.

 

[doug748]

On my phone I cannot see the images, only a notice that says 'stop - this image was hotlinked'. I assume others can see it. Odd.

I am getting the same on a PC.

 

[Plum]

On my phone I cannot see the images, only a notice that says 'stop - this image was hotlinked'. I assume others can see it. Odd.

I can't see the image either. Tablet.

Www.solocoastalsailing.co.uk

 

[Graham_Wright]

Hallberg Rassy sell stainless lift-off inset hinges which would do the job. See http://www.hr-parts.com/contents/en-us/p2353.html

That's what others describe as cranked.

I think I'll end up with standard kitchen cabinet hinges. They won't be stainless but they are cheap!

 

[rogerthebodger]

Yes - correct - I've done that on the camper but it is not a very strong solution and I have yet to find stainless ones.

https://www.wolfsmarine.com/double-offset-hinge-3-stainless/

some one else asked the same question

https://www.pistonheads.com/gassing/topic.asp?h=0&f=207&t=1653087

https://www.greatlakesskipper.com/rinker-aluminum-12-inch-15-gage-boat-offset-hinge-single


http://www.leevalley.com/US/Garden/page.aspx?p=40068&cat=3,41305,41292&ap=1


https://www.thehardwarehut.com/catalog-product.php?p_ref=302810


A backflap hinges could also be bent to the shape needed

https://hinge.co.uk/products/butt-hinges/back-flap-e23/

 

[Graham_Wright]

https://www.wolfsmarine.com/double-offset-hinge-3-stainless/

some one else asked the same question

https://www.pistonheads.com/gassing/topic.asp?h=0&f=207&t=1653087

https://www.greatlakesskipper.com/rinker-aluminum-12-inch-15-gage-boat-offset-hinge-single


http://www.leevalley.com/US/Garden/page.aspx?p=40068&cat=3,41305,41292&ap=1


https://www.thehardwarehut.com/catalog-product.php?p_ref=302810


A backflap hinges could also be bent to the shape needed

https://hinge.co.uk/products/butt-hinges/back-flap-e23/

Wow - that's not a snippet - that's a veritable fountain of help!

The first two are exactly right.

The third I have tried before - in brass. Special order - extended flaps and no holes.

Perhaps try that again.

This must be a common requirement. I hope others will benefit.

Thanks!

 

[Ruffles]

There's another alternative type of hinge. I've no idea what they are called either - not a great help - but we had a kitchen full of them.
They put the pivot point at the top and bottom corner of the door. I only mention it because they are a 'classic' design and likely to be available in brass.
Found them. Search for corner pivot hinge.

 

[Daydream believer]

A search for wrap around hinges was a success and also lead to "inset hinges".

Now to find in stainless.

Thanks to all.

So the pivotal moment was getting the description & it now hinges on obtaining the correct material otherwise you are still screwed.It is clear that using this forum does open doors to a considerable source of information

 

[rogerthebodger]

Wow - that's not a snippet - that's a veritable fountain of help!

The first two are exactly right.

The third I have tried before - in brass. Special order - extended flaps and no holes.

Perhaps try that again.

This must be a common requirement. I hope others will benefit.

Thanks!

Google image search brings up these

https://www.google.com/search?tbs=s...njO8PO25ajRC8udlBYqwjUyfFunLvDIqc6nKHpMeVuLHQ

https://www.imarineusa.com/WhitecapS-3444.aspx

other sizes also available but only in 304 stainless which would be OK above the waterline

https://www.ebay.com/itm/S-3444-Whi...574276?hash=item4426505244:g:eAgAAOSwpmhbyHOR

https://www.boatid.com/whitecap/folding-seat-hinge-2-lx3-3-16-w-304-stainless-steel-mpn-s-3444.html