what size seacock for VP D12?

[Nick_H]

I need to get a quote for replacing one of my raw water seacocks during this years liftout, but I'm not sure of the size. Anyone know?

 

[aquapower]

I need to get a quote for replacing one of my raw water seacocks during this years liftout, but I'm not sure of the size. Anyone know?

The installation drawing shows 2-1/2" water inlet for raw water pump.

 

[Nick_H]

Thanks, that sounds right.

 

[volvopaul]

Thanks, that sounds right.

Yes

 

[jfm]

I'm in antibes. Shall I jump on your boat and look? 2.5 inch sounds right tho

 

[Nick_H]

I'm in antibes. Shall I jump on your boat and look? 2.5 inch sounds right tho

Thanks. It seems highly likely that it's 2-1/2", and of course the yard wouldn't fit the wrong size so the only risk is the quote will be a few euro out. Having said that, I hadn't ruled out bringing one down and fitting it myself whilst the boat is on the hard, so if there's some hanging around while they're fitting your hardtop and you had a couple of mins spare to pop on board, that would be much appreciated. Don't put yourself out though.

 

[jfm]

Nick, sorry I meant to type this ages ago. Been very busy and not looked on here much. I went to your boat ages ago right after the above posts, intending to look in e/room, but unusually your passerelle was all the way in so I couldn't get on board! I'm these this coming weekend in case that helps

 

[Nick_H]

No worries, and no need to try and get on board this weekend as I'll almost certainly get the yard to fit them anyway.

I'm just trying to confirm my lift out dates, probably w/c 16 March, will Match be in situ on Mole Sud with a shiny new hardtop?

 

[jfm]

No worries, and no need to try and get on board this weekend as I'll almost certainly get the yard to fit them anyway.

I'm just trying to confirm my lift out dates, probably w/c 16 March, will Match be in situ on Mole Sud with a shiny new hardtop?

Yep she should be back on berth Saturday 7th March w shiny hardtop and sanded decks etc. A few little jobs still left to do, but 95% done. I won't be there on the 15 March weekend though!