VP reverse gear oil

Jamie Dundee

Well-Known Member
Joined
24 Jul 2019
Messages
1,544
Visit site
Can anyone tell me which oil I need for my gearbox, as below? I can’t work out from the user manual I have which it should be.

Also, how much oil should I be able to drain from the engine (TAMD41P)? I know I’ll never pump it all out but the 7 litres I’ve got so far seems a bit less than I expected given a capacity of 11 litres.

9432EB32-599A-4B04-A8D5-25D49640BCBD.jpeg
 
Can anyone tell me which oil I need for my gearbox, as below? I can’t work out from the user manual I have which it should be.

Also, how much oil should I be able to drain from the engine (TAMD41P)? I know I’ll never pump it all out but the 7 litres I’ve got so far seems a bit less than I expected given a capacity of 11 litres.

View attachment 100322
ATF
 
After removing the oil on a warm engine (kad32 in my case) I leave the engine overnight and always get more oil out the next morning Even so there is almost certainly some oil retained in the engine.

By the way the following confirms the gearbox uses ATF ..........and quantity
http://fybmarine.co.uk/pdf/Gearbox-oil-quantity-type.pdf
That’s the plan for this morning, I might even add a couple of litres of fresh oil to stir things up a bit. Thanks for the link, I think I’ve got the user manual for an older engine, doesn’t mention my gearbox at all.
I manage to get 8 litres out of my engine (not counting what is in the filter).
Cheers, must try harder :oops: Hopefully I’ll get another litre or so out this morning.
 
That s what I do - well perhaps 1 litre . But I think it just runs through to the sump some old oil is still retained somewhere in the engine.
.
Got another 3/4l ish out, didn’t add any fresh oil in the end but might give it a try next year.
 
Top