vodo gauges

[Seastoke]

so i want to fit water temp and oil pressure gauges on the fly after engine repair ,rather than fit new senders i am going to fit a sele tor switch for cabin or fly so only need gauges ,problem i dont know what type gauges they are ,i have emailed vodo but no response does anyone know of a good supplier who might help cheers roy

 

[volvopaul]

I've done quite a few mods over the years , I'll look in my catalogue later this week for you .

 

[Seastoke]

I've done quite a few mods over the years , I'll look in my catalogue later this week for you .

THANKS P

 

[jrudge]

so i want to fit water temp and oil pressure gauges on the fly after engine repair ,rather than fit new senders i am going to fit a sele tor switch for cabin or fly so only need gauges ,problem i dont know what type gauges they are ,i have emailed vodo but no response does anyone know of a good supplier who might help cheers roy

Before complicating the solution check they don't work in parallel.

I would imagine they would.

 

[Seastoke]

before complicating the solution check they don't work in parallel.

I would imagine they would.

good point i could take wires two the other engine gauge

 

[PCUK]

I've got some VDO gauges going spare. Do you have part numbers or pics to identify their age and type?

 

[Mexican]

Got some older Faria gauges that were fitted to my VP Kad32's - what were you trying to duplicate?

 

[Mexican]

Note to self - Read the original post!! Have got those going cheap if you need them.

 

[Seastoke]

I've got some VDO gauges going spare. Do you have part numbers or pics to identify their age and type?

got no numbers i took pics 1 am after 2,oil pressure and 2 water temp both electric pm me uremail will send

 

[Seastoke]

Note to self - Read the original post!! Have got those going cheap if you need them.

dont under stand sorry

 

[BruceK]

Roy I have a spare VDO temp gauge that you are welcome to use to test the principle. You can have it but it's face has yellowed in the sun so not ideal for a permanent fixture. You can get VDO gauges from Keyparts

 

[Mexican]

Forgot that you had mentioned oil pressure and temp in original post